Help Please - Engine won't turn

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Derek Ward said:
Hi Jt
The Maxifuse nr 2 is for the starter as you've found and also the air suspension compressor (via the relay). Looks like the compressor has a fault OR there is a problem with your fuse box - a known fault on these. This will require the removal of the fusebox to check properly but do you see any melted plastic etc anywhere in there?
Click to expand...

Hi Derek

I had a look and could see some discolouration around the heated windscreen relay. Nothing else too obvious.
I took the RR out to the local garage to pick up replacement fuses and it was OK on the way there although it showed that it was trying to raise the suspension to normal height. On the way back she blew the new fuse and after about 10 mins I got the dreaded EAS Fault warning with all the ride height indicators lit up.
 
gemsdad said:
inside the black box on the nearside inner wing.
Click to expand...

Found the compressor as described (much easier in the daylight). I replaced the blown maxi fuse jumpered 12V across the relay. The pump gave 1 or 2 loud clatters but enough for me to know that was the source of the problem. I have since removed the pump and stripped it down. The metal arm from the motor to the pump has sheered in two. No wonder it was blowing fuses. Anyway all I need now is new compressor.
Thanks for all your help.
 
You must log in or register to reply here.

Similar threads

K
P38 2.5TDI won't start
Replies
8
Views
691
Kelvin'D-MiC'
K
I
Air.Susp.Inactive message on 2005 L322
Replies
4
Views
590
invisible999
I
P
L322 tdv8 3.6 Engine Failure.
2
Replies
29
Views
3K
Mark Piercy
Mark Piercy
M
Classic Range Rover Suffix D Starting Issues - Advice required please
Replies
6
Views
707
Datatek
Datatek
feyniriel
P38 engine disabled for no reason, please help!
Replies
5
Views
1K
pwood999
pwood999
Back
Top