Help!!!!! P38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
chickenboots84

chickenboots84

New Member
Posts
190
Hi guys. Has anybody got a syncmate a could use for my 2.5 td P38? I've plugged my Lynx in but it wont re sync it, i'm just getting fault code 27. Any help would be appreciated.
 
chickenboots84 said:
Hi guys. Has anybody got a syncmate a could use for my 2.5 td P38? I've plugged my Lynx in but it wont re sync it, i'm just getting fault code 27. Any help would be appreciated.
Click to expand...

I have a Syncmate a Faultmate FCR and a Nonocom for the diesels and various other diagnostic units. But i cannot say if i can help you because i don't know where you are. Crystal ball is away for service. :D:D
 
Hi guys. fault 27 is engine disabled. The Lynx will do everything needed but cannot resync Becm to Ecu. (unless i'm missing something)
 
wammers said:
I have a Syncmate a Faultmate FCR and a Nonocom for the diesels and various other diagnostic units. But i cannot say if i can help you because i don't know where you are. Crystal ball is away for service. :D:D
Click to expand...

Im up in the North East :( or you would've been my new best friend!!!!
 
zzr1200 said:
Finland, North East England, North East Kent, North East Scotland, Norway, Russia or Sweden???

Your Location would HELP????????




How deep are your pockets?????
Click to expand...

LOL, Not too deep but would pay to get the job done. It would've been nice to have it up & running for work on Monday.
 
Engine disabled is NOT the same as loss of sync.
Losy of sync is one of the most common P38 problems, if Lynx cannot do a re-sync it's pretty useless. I'd send it back as not fit for purpose.
 
The car hadn't been used in a while and the battery went dead. The keys are unlocking the car and turning it over, no fuel from injection pump. I'm gonna call Omnitec next week cos I paid for the software and it wont even do the most common issue with the P38!!!
 
How is yours turning over as mine won't with 'engine disabled' displayed on the dash. The starter won't energise until the immobiliser is unlocked. I imagine, if you've had to use the key to unlock the door the EKA code is required to sync the system and get the immobiliser opened but why the starter is turning the engine is a mystery to me! What is being shown on the dot matrix warning display on the dash?
 
my EDC code is not matching the EDC/motronic code. I cannot change the code as it's locked. Will a syncmate do this or do i need an unlocked Bemc?
 
N151SDW said:
How is yours turning over as mine won't with 'engine disabled' displayed on the dash. The starter won't energise until the immobiliser is unlocked. I imagine, if you've had to use the key to unlock the door the EKA code is required to sync the system and get the immobiliser opened but why the starter is turning the engine is a mystery to me! What is being shown on the dot matrix warning display on the dash?
Click to expand...
Diesel cranks but does not start, some V8's also crank but don't start, others dont crank, can never remember if it's Gems or Thor that don't crank.
 
chickenboots84 said:
my EDC code is not matching the EDC/motronic code. I cannot change the code as it's locked. Will a syncmate do this or do i need an unlocked Bemc?
Click to expand...
If the BECM code does not match the EDC code, you have to read and note the EDC code, then go to the BECM and write the code back, it is not an automatic process. The correct version of Syncmate will do that.
 
Datatek said:
If the BECM code does not match the EDC code, you have to read and note the EDC code, then go to the BECM and write the code back, it is not an automatic process. The correct version of Syncmate will do that.
Click to expand...

I've tried, but when i try to go into the "advanced settings" it's coming up as locked :( will the Syncmate work around this and re code? really appreciate your help by the way!
 
You must log in or register to reply here.

Similar threads

p38DH
P38A Diagnostic device
Replies
8
Views
1K
p38DH
p38DH
B
P38A Mistery problem
Replies
4
Views
472
Grrrrrr
Grrrrrr
G
P38A Range Rover P38 4.6 fault code
Replies
14
Views
1K
Grumpy Rover
G
feyniriel
P38 Nanocom EDC fault code?
Replies
17
Views
997
Grrrrrr
Grrrrrr
S
Newbie urgent help supercharged 55 reg problems
Replies
2
Views
536
Grrrrrr
Grrrrrr
Back
Top