HELP! i GOT A PIECE MISSING

Andrewrp6 · Mar 23, 2013

Now then, a previous owner of my series 3 did a clutch change at some point and removed the panels between the gearstick and the bulkhead. He forgot (!?!) to put it back. I have the large part that sits over the gearsticks, and the part that joins onto that, but am missing the last piece that is actually riveted (?) to the bulkhead. Any ideas where I could source one? I dont see it listed with anyone. Cheers

crashbox · Mar 23, 2013

Load up a photo where the missing part should be. Look on ebay for anyone breaking a Landy.

Bump · Mar 23, 2013

Sounds like you need part 330069

http://www.landrover-parts.net/proddetail.php?prod=S2-330069

Devs90 · Mar 23, 2013

I could probably get one if you get me pics

Andrewrp6 · Mar 23, 2013

Erm, I actually got that part (2 of them), its what goes between that and bulkhead. I will try and sort a pic out by this afternoon - my phone aint up to much! Thanks for your responses

Bump · Mar 23, 2013

In that case... I have some bad news for you....

DSC_00005-BH-Type-1-Cab-Side-Rolling-Chassis-1410101.jpg

The next bit IS part of the bulkhead...

Andrewrp6 · Mar 23, 2013

Oh no really? I can see it now. Im probably gonna have to make the part, its the part that protrudes from the flat area of bulkhead. That pic may actually help me in that case, thanks

Bump · Mar 23, 2013

yeah afraid it sound like the previous owner got a bit too keen with a grinder

You might be able to buy replacement sections to weld on...

johnny curt 1 · Mar 23, 2013

where bouts are you matey as i could recreate and refit that part if you can get the bulkhead to manchester for a day

honolulujoe · Mar 23, 2013

on the later s3 bulkheads wasn't that part detachable and screwed onto the bulkhead, maybe one of those would fit or could be slightly altered, if anyone still makes them of course.

honolulujoe · Mar 23, 2013

Bump said:
In that case... I have some bad news for you....

The next bit IS part of the bulkhead...

is that a brand new bulkhead bump or a resto,d one?

looks like a perfect paint job, really smart.

Dr_evil · Mar 23, 2013

If you had wanted that part you should have told me

I sliced it out of mine the other week with the grinder then melted it in the incinerator

Bump · Mar 23, 2013

honolulujoe said:
is that a brand new bulkhead bump or a resto,d one?

looks like a perfect paint job, really smart.

I'm afraid it's just a Google image i quickly pulled up for purposes of showing the OP what it is meant to look like.

My bulkhead is currently having a lot of welding done to it by my garage to keep it going, i can only dream of it looking like that one!

honolulujoe · Mar 23, 2013

whoever did do it should be proud of themselves that is a quality job.

Andrewrp6 · Mar 23, 2013

johnny curt 1 said:
where bouts are you matey as i could recreate and refit that part if you can get the bulkhead to manchester for a day

Im in West Wales, best part of 200 miles! thanks for offering anyway. That part is mild steel I assume?

Andrewrp6 · Mar 23, 2013

Bump said:
yeah afraid it sound like the previous owner got a bit too keen with a grinder

You might be able to buy replacement sections to weld on...

Your right he went bit mad. I might give Craddocks a tinkle see if they got anything similar, cheers

Andrewrp6 · Mar 23, 2013

Hallelujah, Pegasus Parts got them in stock £30! sorted. thanks.

Bump · Mar 23, 2013

Andrewrp6 said:
Hallelujah, Pegasus Parts got them in stock £30! sorted. thanks.

That's good news

Glad you've got it all sorted.

HELP! i GOT A PIECE MISSING

Andrewrp6

New Member

crashbox

Well-Known Member

Bump

Well-Known Member

Devs90

Active Member

Andrewrp6

New Member

Bump

Well-Known Member

Andrewrp6

New Member

Bump

Well-Known Member

johnny curt 1

Well-Known Member

honolulujoe

Well-Known Member

honolulujoe

Well-Known Member

Dr_evil

Banned

Bump

Well-Known Member

honolulujoe

Well-Known Member

Andrewrp6

New Member

Andrewrp6

New Member

Andrewrp6

New Member

Bump

Well-Known Member

Similar threads