hello please help with some torque fig's

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

gvega

New Member
Posts
8
Location
northumberland (somewere)
hello
ive daffley stripped my freelanders rear diff but iam now stuck
i have a workshop manual but no were in the hundred's of page's does it say wot the torque setting's for the crown wheel bearing caps R does any 1 know.
 
what-ever you do Do not do anything to the hair dryer. don't bother with the diff its not like you can do any Real mud plugging is it? Just remember it not a proper land rover.
 
gvega said:
hello
ive daffley stripped my freelanders rear diff but iam now stuck
i have a workshop manual but no were in the hundred's of page's does it say wot the torque setting's for the crown wheel bearing caps R does any 1 know.
Click to expand...
just a thought , does your manual give list of settings by bolt size? some do . if not hold out some of our engineering types will prob know
 
cheers uncle albert
the manual dose for the gearbox & ird i l thought of that but was holding out for the right figs as i could nak the alloy case.
this came about from a clunk at the rear some say diff mounts i replace them end of last year with poly's along with all rubber suspention bushs part from the anti roll bar (bolts are a twt) so just replaced vcu & prop uj + rubber boot & diff bearings + oil seals hoping to stop that clunk pus oil leak on ether side of the diff
 
You must log in or register to reply here.

Similar threads

AH-4x4
Help ending my leak - 200TDI
Replies
10
Views
463
AH-4x4
AH-4x4
F
rear wheel bearing question
Replies
3
Views
954
frenchdave
F
M
Isle-of-wight please help
Replies
3
Views
741
JohnM70
JohnM70
L
Freelander 1 Rear axle noise
Replies
1
Views
1K
landycrowford
L
chemmie
Rear wheel hub adventures
Replies
12
Views
1K
chemmie
chemmie
Back
Top