Hello from British Columbia, Canada 2001 P38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Soir

Soir

Member
Posts
12
Location
British Columbia, Canada
Hello all!

I am starting my work on my 2001 P38 4.6 HSE. I figured I would join your forum as you all seem to be quite helpful and knowledgeable on here.

The current issue I am attempting to tackle and will take to the forums for is to correct my SRS and Aribag Fault.

The current issue: My Nanocom will communicate with all systems except the Airbag SPS2 therefor I am unable to diagnose the fault with the airbag at this time. I will need to fix the ODB port/ECU communication error to get rolling. Your advice will be welcome. Thanks you in advance.
 
There's a couple of 'boxes' under the RHS kick panel, at least on the RHD car, one is cruise related, the other is SRS related, give it a wiggle
 
IMG_20220410_100323~2.jpg
IMG_20220413_160232_1~2.jpg
IMG_20220416_190703_1~2.jpg
 
Hippo said:
Welcome to the forum
I7pha4t.jpg


Did ter get it resolved?
Click to expand...
Unfortunately no, I have not yet figured it out. I have done over all the yellow connectors except the ones in the dash. I reviewed the shop manual and it expressly warns against using a micrometer on the SRS equipment to test. I will check the few connectors under the dash and then I suppose I am left going to the dealer? She will not pass inspection with an airbag fault. If only my Nanocom would communicate with the SRS ECU I would have a clue but I am lost.
 
You must log in or register to reply here.

Similar threads

V
Hello. New member. 2004 vogue no amp fitted.
Replies
3
Views
524
Vogue ers
V
L
Hello from Turkiye
Replies
0
Views
428
LR35
L
spacebrodie
Hello from Scotland!
Replies
18
Views
879
brianp38dse
brianp38dse
L
New here!
Replies
3
Views
151
brianp38dse
brianp38dse
J
New member Mid Wales
Replies
18
Views
1K
JohnKaye
J
Back
Top