essexpestcontrol
New Member
- Posts
- 484
- Location
- grays, essex
firstly a big thank you to landyzone, being a freelander owner of around a week, this forum and its members,Q & A's have helped me no end
we noticed the heater didn't work on 1 and 2 settings, reading on here it seemed a common problem and advice on how to fix
ordered new resistors via evil bay and they arrived today
sure enough on removing the resistors (whilst upside down in the drivers footwell)
1 and 2 had snapped/brittle
as the new pack included 1,2,3 decided to replace all with new bits
I have a slight disability in my left hand, and being left handed soldering is not my best forte, but we got there in the end
fitted back into the heater, and uricka , we have a working full set of controls, 1,2,3 and 4
we noticed the heater didn't work on 1 and 2 settings, reading on here it seemed a common problem and advice on how to fix
ordered new resistors via evil bay and they arrived today
sure enough on removing the resistors (whilst upside down in the drivers footwell)
1 and 2 had snapped/brittle
as the new pack included 1,2,3 decided to replace all with new bits
I have a slight disability in my left hand, and being left handed soldering is not my best forte, but we got there in the end
fitted back into the heater, and uricka , we have a working full set of controls, 1,2,3 and 4
