aceofhearts
Active Member
- Posts
- 64
- Location
- Biggleswade
Anybody recommend the best place to get a switched live feed for heated seats?
Heated seat switched live feed - 61 plate
- Thread starter aceofhearts
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,479
Considering the current draw of the heater pad, I would install a dedicated circuit with its own fuses and a relay switched via the ignition live.....but I assume you know that already....as to where to get one from, not sure on a 61 plate!
alexc2701
Active Member
- Posts
- 680
- Location
- Nottingham
+1 to the electric windows. Think that's how it is supposed to be wired from the fuse caption
You should be able to splice it in to the live feed to the electric window switch? Then it will still be ignition controlled so can't be left on by accident
Are you using the kit with the proper land rover switch and or the round rocker led switch? Or making your own? I got a free rocker switch kit but I'm tempted to get the proper switches or full kit.
You should be able to splice it in to the live feed to the electric window switch? Then it will still be ignition controlled so can't be left on by accident
Are you using the kit with the proper land rover switch and or the round rocker led switch? Or making your own? I got a free rocker switch kit but I'm tempted to get the proper switches or full kit.
Attachments
aceofhearts
Active Member
- Posts
- 64
- Location
- Biggleswade
Thanks guys, ive used a fuse take off connector from ebay that i have actually plugged into the fuse location where factory heated seats would have been (same as electric windows)
Rounds rocker switches temporarily fitted but genuine land rover ones on order atm to make the job a lot neater
Rounds rocker switches temporarily fitted but genuine land rover ones on order atm to make the job a lot neater
