Freelander 1 Hdc and tc on over 40mph but not sure which brake light switch I need ? Please help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Graham Newbie

New Member
Posts
6
Location
Wrexham
Brand new 2004 Freelander 1 1.8 owner looking for help already. This is my first Landy ! My hdc and tc comes on over 40mph, I've looked at the threads and I need to replace the brake light switch but don't know which switch I need and local dealer doesn't know either, one thread said XKB100170 and the other a completely different part number, please help and a guide on fitting would be so appreciated, thanks in advance.
 
Have a quick look at Rimmer Bros. my brake light switch for 2002 later td4 xkb100170 is different to the xkb100120 as the latter need a adapter cable. The first two relate to the freelander 1 while the last two relate to the MG. xkb100150
 

Attachments

  • 98778-Large.jpg
    98778-Large.jpg
    12.6 KB · Views: 205
  • 476905-Large.jpg
    476905-Large.jpg
    11.8 KB · Views: 213
  • 58621-Large.jpg
    58621-Large.jpg
    14.9 KB · Views: 247
  • 643827-Large.jpg
    643827-Large.jpg
    16.9 KB · Views: 216
My 2005 (55) had the got the first one in the above pics. The replacement that I used looks more like the second but comes with a small cable and connector.
 
We bought a replacement switch the story I heard was the supplier changed the spec without bothering to tell anyone one, after having the two amigos. Since then it has worked fine. The switch comes with a wiring adapter which cost me more than the switch The connector is YMQ503280 on the bag (Made in Egypt!) Switch I think is second from the left with white plastic casing
 
Don't forget to disconnect the battery before replacing as this drain down the computer and reset the sensors. On the Haynes manual it mentions a secondary brake switch for cruise control switch. Also when refitting you will need to pull the lever part of the switch out after depressing the brake pedal.
 
Thanks so much for all the prompt replies, really appreciate it ! Hopefully I will get the right switch from your threads, I'm a complete novice but trying !
 
Back
Top