stuu
Well-Known Member
- Posts
- 1,946
- Location
- Aberdeenshire
I dont think my 96 dse has any how would i know or tell if it has tcs?
Got stuck again !!!!!!!
- Thread starter Ianwallace
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
Stick on some wet grass and give it a bit of wellie, should hear the TC clacking away.
stuu
Well-Known Member
- Posts
- 1,946
- Location
- Aberdeenshire
Hahaha its clean at the moment. Last time being yobbish out and about i did hear ticking like abs kicking in but nowt when i bellyed it
dashwoodlandy
Member
- Posts
- 62
- Location
- Kenilworth, Warwickshire.
Ianwallace
Active Member
- Posts
- 288
- Location
- Calne Wiltshire
Ok I will get a long wheel nut thing as mine is missing from the tool kit. I've only tried to turn it with my hands gripping the tire with a ninja like grip
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
You should be able to very slowly turn it just by gripping the tyre, does need to be in neutral though, if I can do it at my age, should be no problem for a youngster like you
Ianwallace
Active Member
- Posts
- 288
- Location
- Calne Wiltshire
Datatek you are so kind. I'm 40 and I'm not the strongest of chaps
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
So I can give you over 30 years
It just needs constant pressure, won't move a lot.
Ianwallace
Active Member
- Posts
- 288
- Location
- Calne Wiltshire
Will try with a wheel bar. The guy on the video looked like he had to put a lot of pressure on the wheel also
Ianwallace
Active Member
- Posts
- 288
- Location
- Calne Wiltshire
I don't think there is anything wrong with the car just the plank behind the wheel
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
It'll have ETC on the brake modulator under the brake reservoir under the bonnet.
stuu
Well-Known Member
- Posts
- 1,946
- Location
- Aberdeenshire
Ok ta grrrrr il have a look when bonnets up soon
stuu
Well-Known Member
- Posts
- 1,946
- Location
- Aberdeenshire
Just says abs on the blue plate. No tcs i guess. I like to live dangerously
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
It will probably have the code ANR2239 on it, IIRC. ANR2238 is rear wheel traction control. Pretty certain it is that way around.
It really doesn't make that much difference. You can upgrade the modulator and ECU to give rear wheel TC. Costs about 75 quid with second hand parts.
stuu
Well-Known Member
- Posts
- 1,946
- Location
- Aberdeenshire
Il just keep the wheels spinning il look into it if i ever need a break modulater lol would 4 wheel work aswell or more hassle then worth trying? My range will soon be upto scratch. Motable again (its got till july) and no more niggles looks like iv been lucky after 2 more tyres 2 steering bars n a wiper stalk and window regulator il have change with my 1500 budget.(That was my original thaught just to get it back on the road)
il look into it if i ever need a break modulater lol would 4 wheel work aswell or more hassle then worth trying? My range will soon be upto scratch. Motable again (its got till july) and no more niggles looks like iv been lucky after 2 more tyres 2 steering bars n a wiper stalk and window regulator il have change with my 1500 budget.(That was my original thaught just to get it back on the road)
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
4W requires rewiring or more complex changes. I've only seen one thread from someone who claimed to have done it and he wrote it off a few days later so I'm not convinced he was successful.
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
Better off fitting limited slip diffs from Ashcroft Engineering, about £300 each IIRC.Il just keep the wheels spinning
stuu
Well-Known Member
- Posts
- 1,946
- Location
- Aberdeenshire
Thats the best idea datatek
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Or Kamlockers at £750 ...
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Il just keep the wheels spinning
It just occurred to me that there are 2 different diffs out there that I know of: one with 4 pin and 1 with 2 pin. It occurs to me that the 4 pin ones are probably on the axles with TC and the 2 pin ones where they have no TC. So, sticking TC on an axle with a 2 pin diff might cause shortened lifespan. I'm only theorising though. JamesMartin or Wammers of somesuch would probably know for sure.
