Going to look at a 200

Ttwo · Dec 8, 2017

Got it for 1850 and collecting in in the week

Roaming Wombat · Dec 8, 2017

Bargain!

philclarke · Dec 9, 2017

Sounds a fair price, I paid 2.5k for this,
Came with a blown turbo,
and 3 weeks mot !!!

alexc2701 · Dec 9, 2017

philclarke said:
View attachment 136415 Sounds a fair price, I paid 2.5k for this,
Came with a blown turbo,
and 3 weeks mot !!!

Did you at least get the jerry can too?

1850 is a well good price

Wimblowdriver · Dec 9, 2017

alexc2701 said:
Did you at least get the jerry can too?

Might look like a jerry can, but to me its part of a very effective anti theft device

philclarke · Dec 9, 2017

Found a better anti theft device !!!!!!

Took the engine out and put it near the house so can hear if anyone tries to start it.
Only problem is a quick dash to the shops takes a little longer than it used to.

Ttwo · Jan 4, 2018

Ttwo · Jan 4, 2018

All collected and I gave it its first was in 12 years ..... mot soon then I’ll take it for a proper clean down

Mr S1 · Jan 4, 2018

And you can put the numberplate back on the Alfa as well

Doesn't scrub up bad on that pic !

Ttwo · Jan 4, 2018

Mr S1 said:
And you can put the numberplate back on the Alfa as well

Doesn't scrub up bad on that pic !

It’s a seat Leon lol but we’re waiting for insurance to collect it it’s smashed front and rear

Ttwo · Jan 4, 2018

The side repeater is off because it wasn’t working and after popping the lense off it won’t go back on.....so iv ordered a new set and a set of lenses for the rest

Mr S1 · Jan 4, 2018

Oh lovely....some dope ran up the back and shunted it forward I assume ?

Ttwo · Jan 4, 2018

Ye 2017 Range Rover as I was sat in traffic

Marmaduke · Jan 4, 2018

Decent looking tratter that, from this distance anyway.

You'll want wheel spacers or a set of disco axles if you want to fit boosts on it...

Ttwo · Jan 4, 2018

Noted!! I'm in no rush tho I'm getting the important bits done first

flat · Jan 4, 2018

thats cleaned up alright, i would be tempted to keep it original, t cut the paint and clay bar it if you want it nice, try and save the original stickers though, they look ace, and you dont see many with them anymore

Ttwo · Jan 4, 2018

Ye someone said the other week keep the stickers as my plans are to paint it sometime....but your right the stickers are cool so I would order a new set to put on

Mr S1 · Jan 4, 2018

Ttwo said:
Ye 2017 Range Rover as I was sat in traffic

Typical RR drivers....

bluedog333 · Jan 4, 2018

Ttwo said:
Ye someone said the other week keep the stickers as my plans are to paint it sometime....but your right the stickers are cool so I would order a new set to put on

I’m one of the decal fans, keep them! Tricky getting hold of new sets of stickers though, try a decent polish/t-cut to see how the original paint scrubs up.

doriz · Jan 4, 2018

Concur with the 200tdi injun, I only need to flinch the ignition key and its fired up. Gerrit moved to 'members projects' so we can keep an eye on progress - nice 'Fender.

Recon you might need a new turbo heat shield judging by the picture.

Going to look at a 200

Active Member

Well-Known Member

Active Member

Attachments

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads