Glow plugs
- Thread starter bedllyfan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
MrPDude
Active Member
- Posts
- 566
- Location
- Birmingham
Theyre not expensive and not hard to change. Keep a set at home. Especially with the coming winter
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
they are if the break in head while trying to undo them
sierrafery
Well-Known Member
- Posts
- 17,872
- Location
- Arad/Romania
That's if u are not unlucky ... they used to stuck in the head or crack and leaving theirs extremity within.... happened to me... i was forced to take the head off for one.
ricc
Well-Known Member
- Posts
- 2,671
- Location
- central somerset
its one of them things that dont get touched unless the beast wont start one morning... ive not changed either the disco 200 tdi or the fourtrak ones but the renault megane seemed to need them every couple of winters
Langer
Active Member
- Posts
- 117
- Location
- Dunfermline, Scotland
Just leave them until it doesn't start they aren't a servicable part it not necessary to change them tegu wry.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
you can test the quite easy with jump leads once removed negative clamp on threaded part that screws in head positive touching end wire fastens to,they should glow dull red quickly if good
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
When ye come to put them back in, use a wee smear of copper grease
http://www.landyzone.co.uk/lz/f41/renewing-glow-plugs-86457.html
http://www.landyzone.co.uk/lz/f41/renewing-glow-plugs-86457.html
Hello glow plug experts. Here's the thing. I've got a series 111 converted to a 15J probably from a FX-4 taxi. Checking the glow plugs because of longer starting and find - three of one type and one of another! The three are really old by the look of them, no markings visible, one has failed, one looks cracked and the other has a scar. The fourth one, in cylinder 2 from the front is a Champion CH63, the normal fit for a 2.5 N/A. However, this type won't go in the other cylinders! The ones that do have a narrower probe that is knotched. I'm wondering if they are CAV originals. I'm searching around for replacements but the "specialists" seem to have never heard of a 15J. Anyone out there hit this problem before?
Similar threads
