L322 Genuine Front metal brake pipes P/N?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

donp38

Well-Known Member
Posts
1,061
Location
England
Hi All.
Can anyone advise me what the part numbers are please for the metal brake pipe that terminates at the ABS pump manifold at one end and the brake hose at the other for both front left and front right wheels?
Other than trying LR, any thoughts on a supplier?

Many thanks.
 
donp38 said:
Hi All.
Can anyone advise me what the part numbers are please for the metal brake pipe that terminates at the ABS pump manifold at one end and the brake hose at the other for both front left and front right wheels?
Other than trying LR, any thoughts on a supplier?

Many thanks.
Click to expand...
Can't your local garage knock you one up? If you had put in your location there may be a member who will make you one ,I will if you're near me. Failing that try lr.com
 
As Alan says, any garage can knock up some brake pipe.

On my 2005 SC, my front N/S/F pipe rusted through just behind the arch liner and I knocked up a pipe (first time I had made up my own brake pipe)
Didn't need to go to the ABS pump, there was a connector joint by the NSF metal wheel arch under the hood, so knocked up a pipe from there to the flexi hose.
 
I have added my location...Warwickshire....Many thanks.
All will be fine thanks to all.
I'll take off the liners and have a look....
Thanks again.
 
Genuine pipes will probably be steel like the originals & rust. Better to use Copper-Nickel pipe.

FullFatRR has threads about this; https://www.fullfatrr.com/forum/topic31901.html

normal_Screen%20Shot%202015-05-19%20at%2017.07.01.png
 
Many thanks.
Wheel arches off at the weekend then...looks as though I cannot get the original pipes.
I need to plan some time....oh happy days....
 
donp38 said:
Many thanks.
Wheel arches off at the weekend then...looks as though I cannot get the original pipes.
I need to plan some time....oh happy days....
Click to expand...
If you send me some toilet roll inners stapled and cellotaped together then I'll return post with some properly flared Kunifer pipes made to your desired length.;)
 
Well.
Sorted...but if anyone knows of anyone who can supply genuine set of front pipes, please let me know.
Many thanks..
 
You must log in or register to reply here.

Similar threads

findo1
Disco 1 The mysterious pressure reducing brake valve.
2
Replies
25
Views
660
resto_d1
R
S
Clutch slave pipe routing
Replies
0
Views
449
sprie
S
kevstar
D1 200tdi lt77 & transfer box n bits
2
Replies
22
Views
2K
kevstar
kevstar
stuu
L322 Power steering opinions/suggestions please,
Replies
1
Views
565
stuu
stuu
02Disco2
Disco 2 Abs & TC lights but no fault codes
Replies
1
Views
318
sierrafery
sierrafery
Back
Top