Series 2 Gear lever vibration and movement at idle.

EWG · Oct 26, 2015

Can I have some advice please.
At idle and in neutral the gear lever of my 1962 2a 88" moves from side to side and "buzzes".
I'm told that it is a worn bush at the selector end but which one please?
Many people just put up with this but after 10 years' ownership I've decided to fix it.

How do you do it, is it complicated and how long would it take me, a reasonable self taught spannerman to do the job.

Thank you.

jamesmartin · Oct 26, 2015

has the pivot much play ,is locater pin broken or worn , you can get play with the stick if ball that locates in to the selector jaws wear

dominicbeesley · Oct 27, 2015

Pull the tunnel up and have a look. There should be a rubber-oring that sits in a groove at the end of the gear stick. They don't last for ever. Easy enough to replace. You might even be able to do it without removing the floor.

EWG · Oct 27, 2015

Thank you gentlemen.

Series 2 Gear lever vibration and movement at idle.

EWG

Active Member

jamesmartin

Well-Known Member

dominicbeesley

Well-Known Member

EWG

Active Member

Similar threads