Gateway actuator disconnected from turbo
- Thread starter Jack rush
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Hi,
There is a fairly std thread count, iirc it is 11, but I have had a few beverages. A search on here would help.
Cheers
There is a fairly std thread count, iirc it is 11, but I have had a few beverages. A search on here would help.
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
what do you not understand?
Cheers
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
OK,
as you are in Essex, let us keep this simple.
Wind the wastegate actuator end of the rod onto to the wastegate actuator end of the rod, until there are only 11 to 13 threads showing.
Cheers
as you are in Essex, let us keep this simple.
Wind the wastegate actuator end of the rod onto to the wastegate actuator end of the rod, until there are only 11 to 13 threads showing.
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Then go to the intro thread and tell peeps about yourself.
BTW, you should not be driving on the road ....LOL
Cheers
BTW, you should not be driving on the road ....LOL
Cheers
ozzyboydeano
Well-Known Member
- Posts
- 843
a big thumbs up most 16 year olds wouldn't even of picked this up even if you where from oxford
learning from a young age a very good place to start as there is an old saying cant teach old dogs new tricks ..count threads etc
this is only a rough guide from a stock value
..depending on the age and wear and condition on the actuator also comes into consideration ?
a simple rule .....when ever playing or adjusting turbo settings... a boost reading will be needed even playing around in a farm
firstly speak to the owner on why its disconnected or maybe bring it to his attention as may of been disabled for a reason
i have seen my self wind down fuel supply and turbos working in small farms and mine sights on machinery due to a simple fact of young blood taking to many chances when unsupervised
Last edited:
ozzyboydeano
Well-Known Member
- Posts
- 843
ok lets keep this simple comment as your from oxford and possibly intoxicated at the same time
11 to 13 turns witch is it ?
what would be the desired pressure ?
so break it down. and school me please
Similar threads
