Engine not starting FL2

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Craiger

New Member
Posts
1
HI All,

Can anyone shed some light on the following problem. FL2 fuel filter changed recommended every 12 months filter was primed but may not enough. Filter and lines have been bleed using hand pump. injectors hoses have been bleed also. battery hold full charge currently at 14.7 volts. fuses checked. Immobiliser checked. unfortunately the engine is cranking but will not fire up.... all working like clockwork before. recent works carried out ( service, hence fuel filter and turbo actuator replaced due to loss of power) has anyone had the same experience. ( could it be possible crank sensor? though landy was running well before hand)

any help advice greatly appreciated

Thanks
 
Back
Top