P38A Front Suspension - "wobbles"

brianp38dse · 2025-04-25T22:09:03+0100

Dont bother trying to press the old bushes out run a drill bit through the bush a couple of times just catching the inside of plastic outer and you should be able to collapse the outer and hook them out with a screw driver.

Frank_38 · 2025-04-26T07:46:38+0100

Good morning everyone,
I bought a hydraulic press - 6 tons.
I thought it would make it totally relaxed. won't it work?

kermit_rr · 2025-04-26T07:55:16+0100

brianp38dse said:
Dont bother trying to press the old bushes out run a drill bit through the bush a couple of times just catching the inside of plastic outer and you should be able to collapse the outer and hook them out with a screw driver.

When i did mine it took significantly more effort to get the old ones out. Lots of cutting, drilling and hammering with a big chisel

Frank_38 · 2025-04-26T09:10:18+0100

Good, I am motivated. I have cleaned the arm a little. I'll paint it later.
This is how I imagined my action. Will it work? somehow my press seems puny.
"Nothing is aligned in the picture yet"

kermit_rr · 2025-04-26T09:18:53+0100

Doesn't the adapter go the other way up? You want to press on the edge, not the middle

pwood999 · 2025-04-26T09:19:00+0100

I also used the "drill near to the plastic outer method". Much easier than trying to press the old bushes out.

You will definitely need either the proper tool, or several jubilie clamps & the taper bearing for the new bushes.

pwood999 · 2025-04-26T09:19:45+0100

Frank_38 said:
Good, I am motivated. I have cleaned the arm a little. I'll paint it later.
This is how I imagined my action. Will it work? somehow my press seems puny.
"Nothing is aligned in the picture yet"

That's not a press tool. It looks like its from a brake wind back kit ?

Frank_38 · 2025-04-26T09:31:26+0100

kermit_rr said:
Doesn't the adapter go the other way up? You want to press on the edge, not the middle

yes, I also have the right adapter with a hole in the middle. It is a simple press for 100 EUR.
Has anyone ever tried a 6 ton press?

Frank_38 · 2025-04-26T16:17:47+0100

Unbelievable!
that worked wonderfully with the press. It took less than 2 minutes and the bushes were out.
I thought too much about it.

Thanks to everyone for the support!!!

P38A Front Suspension - "wobbles"

brianp38dse

Well-Known Member

Frank_38

Active Member

kermit_rr

Very

Frank_38

Active Member

Attachments

kermit_rr

Very

pwood999

Well-Known Member

pwood999

Well-Known Member

Frank_38

Active Member

Frank_38

Active Member

Attachments

Similar threads