Front radius arm bush to big?

TorsionBhudda said:

From memory the bushes should touch. there is two different radius arm width 38mm and 45mm. what length is the metal sleeves that came with your polybushes? Once fitted the sleeve should be flush with the ends of the polybush. If you measure the metal sleeve length this should tell you if it's correct bushes. i.e sleeve length is 38mm but radius arm width is 45mm then you have the wrong bushes.
Hope this helps

Click to expand...

danny6801 said:

Can disco radius arms be fitted to a older 90 as I'm aware the disco ones are slightly wider my question will they fit in the gap on 90 standard axle.

Click to expand...