RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
There is nothing more off fu cking than French officialdom at its worst!
And Spanish.Oh yes there is fuc king Portugese...lol...
...and Italian, and Greek, they all employ too many fu ckers to do fu ck all except push paper in the name of their govts for a few years then retire on a pension.And Spanish.
They should have failed the car as beam benders are not allowed if the car is registered here.I'm late to the party but I have re-registered my 2001 Vogue in France so had to get a CT. Just before I left the UK I got a
an MOT done. I think that the MOT is more rigorous & comprehensive than a CT but it passed with advisories on an oil leak & oddly enough tappet noise.
It failed the CT first time on alignment of headlamp beams even though I had put beam benders on. I carefully realigned the headlamps & ignored the documentation concerning placement of the beam benders & put them where they actually worked. Next visit it passed the CT with an advisory regarding an oil leak. The tester was impressed when I pointed out that next day was the car's birthday as it was twenty years since the date it was first registered in the UK.
I hadn't realised that there might be an issue with 4WD ABS & TC but evidently the CT test centre that I found was happy with it. The guy who tested my car was very jovial & there is another tester there who by her accent comes from Bolton. I only used this CT centre because it was the one that had the easiest appointment when I looked to book a test online. The CT test is every two years although I will take it in for an MOT on its anniversary when I am visiting the UK as it's good to have a third party take a look at the car especially underneath as I don't have access to a lift.
Beam benders are allowed & have been perfectly legal for a CT for several years.They should have failed the car as beam benders are not allowed if the car is registered here.
Make sure they use rollers under the axle not being tested or damage may be done to the transmission.
Not according to my information, they are legal for visitors but not for French registered RHD cars, certainly I was refused a CT on my P38.Beam benders are allowed & have been perfectly legal for a CT for several years.
That used to be the case but they changed the rules a few years ago. There is a document you can give the tester if they are unaware of the change. Some testers just seem bloody minded & will fail with beam benders whatever the rules. The answer is to go to a friendly CT station who are aware of the up today rules. You just need to prevent the passenger side kick up from the headlamp so you have flat beams. There is no need to have LHD headlamps with kerbside kick up.Not according to my information, they are legal for visitors but not for French registered RHD cars, certainly I was refused a CT on my P38.
Do you have any link to the document you mention or to the rule change?That used to be the case but they changed the rules a few years ago. There is a document you can give the tester if they are unaware of the change. Some testers just seem bloody minded & will fail with beam benders whatever the rules. The answer is to go to a friendly CT station who are aware of the up today rules. You just need to prevent the passenger side kick up from the headlamp so you have flat beams. There is no need to have LHD headlamps with kerbside kick up.
Below is an extract from the CT testers manual that says RHD headlamps are a failure except those equipped with a device making the beam flat (e.g. masking adhesive or specific lamp device).Do you have any link to the document you mention or to the rule change?
On the P38, not having rollers under the axle not being tested will destroy the VCU at the very least.If the MOT is under 6 months old you used to be able to use that when registering a car, not sure if it is the same after brexit, I know of lots of RHD cars that have passed with beam deflectors, I think the rules changed some years ago as it used to be the case you had to change the lights,
as to the ABS I would think rolling 2 wheels and having the other 2 stopped will make the ABS think 2 wheels have locked under braking this may show up a fault that you would not see under normal driving.
I think like the MOT it is a case of finding a test centre that is more lenient on older cars
when I bought my work van about 4 to 5 years ago you could and I did use a UK mot instead of CT test as it had been done less than six months, I think it was a move to except paper work from other EU countries, not sure if they would except it now after brexit, I am working for a German at the moment who is going through the process at the moment I will ask him what he uses,On the P38, not having rollers under the axle not being tested will destroy the VCU at the very least.
Again the info I have has always stated that a French CT, a Quittance Fiscal, a purchase receipt and a certificate of conformity are needed to register a car in France. the certificate of conformity is not required on some newer cars as the info is in the French system.
Do you think it would be the same for a Freelander and the VCU ?On the P38, not having rollers under the axle not being tested will destroy the VCU at the very least.
Again the info I have has always stated that a French CT, a Quittance Fiscal, a purchase receipt and a certificate of conformity are needed to register a car in France. the certificate of conformity is not required on some newer cars as the info is in the French system.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!