gemsta
New Member
- Posts
- 2
- Location
- shropshire``
Hss anybody else had difficulty connecting a clutch slave cylinder pipe to a master cylinder pipe on a freelander 1 td4? I've replaced my slave cylinder but can't get them connected.
freelander1td4 slave cylinder replacement
- Thread starter gemsta
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
guineafowl21
Well-Known Member
- Posts
- 3,349
- Location
- Inverness
What tool are you using to push the locking ring in? There’s a proper tool, but I used a screwdriver or a pair of needle-nose pliers.
They may not go together if there’s pressure/lack of give in the hydraulics. Is your clutch pedal all the way back up?
They may not go together if there’s pressure/lack of give in the hydraulics. Is your clutch pedal all the way back up?
gemsta
New Member
- Posts
- 2
- Location
- shropshire``
Im trying to put them together not apart, and yes clutch pedal is all the way back up. the part is from britpart so im guessing its a dodgy part.
In my experience, Britpart should be avoided at all costs.
