- Posts
- 83,255
- Location
- Embasinga stocæ
hasnt been back since Wed, the 16th
Freelander v6 reverse gear stopped working
- Thread starter chmuteba
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Did you put the gearbox in the right way round.
chmuteba
New Member
- Posts
- 4
- Location
- The democratic republic of congo
Hi zefrench, thanks. the year of the gearboxes is the same, all models mafuctered in 2003. From diagnostic, the second gearbox has issues with solenoids valves.
But please help me on this, we removed the gearbox and put it back after inspection but the car is slightly running forward no reverse. it seems also the oil pump not running, what can cause it please and how to fix it? is there any procedure when installing the gearbox such as the locking the converter or....? got no idea why the car not moving in all gears and oil pump not running ( marked "denso" on top of the wheel)????
Thanks
But please help me on this, we removed the gearbox and put it back after inspection but the car is slightly running forward no reverse. it seems also the oil pump not running, what can cause it please and how to fix it? is there any procedure when installing the gearbox such as the locking the converter or....? got no idea why the car not moving in all gears and oil pump not running ( marked "denso" on top of the wheel)????
Thanks
zefrench
Active Member
- Posts
- 428
- Location
- Ontario, Canada
Which gearbox is in, the original or the replacement ? What do you mean the oil pump is not running, what happens for you to say this .
- Posts
- 83,255
- Location
- Embasinga stocæ
has the oil been changed recently?
was the gearbox at the correct temperature?
was the gearbox at the correct temperature?
I'm thinking that the TC hasn't been engaged with the fluid pump when it was refitted. If care isn't taken to ensure the flats on the TC hub are lined up with the pump gear, when it's inserted. Then it's possible to split the gear or push the entire pump assembly into the box.
Either of the above fitting errors will result in no fluid pressure and no response from the box.
The JF506E box PDF manual is here.
https://www.google.co.uk/url?sa=t&s...ghIMAs&usg=AFQjCNE8fudNWYng7pKC5fZ873RmvBjkwA
Similar threads
