Freelander enthusiast/mechanic needed

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
VELZ said:
Sorry Mr Stuart please forgive my naivety I've only had my Freelander three weeks and until now have never been under the bonnet of any vehicle other than to top up the windscreen fluid. This is all a major learning curve for me.
The crank case filter has not been replaced as yet, I have just received the service parts today that I ordered last week, Mann oil filter, Mann Fuel filter, Air filter and would like to order if its a sensible thing to do the upgraded oil separator/crank case filter and have not yet purchased engine oil as I'm not sure which I should use.
As for the MAP sensor, I have no idea what that is or where its located. I also do not know what the Turbo actuator is.
I got the car three weeks ago, and went from London to Devon for the bank holiday weekend with it, it was only on the hills and when I kicked down that I noticed the lack of power and black smoke. had never driven one before that so didn't know how it should perform.. so I guess it had been like that since I got it..
Click to expand...

please , no need to ever apologise , will get there in the end

will find some pics for u to tell u where parts are, sorry i meant maf not map , doh,

the replacement of the crank case breather is very important , get the upgraded BMW type, it's a very clever designed piece of plastic that doesn't need changing

shame ur not closer otherwise i could have helped u fit the parts etc, am in swanley kent and gone through the engine

if we start with the easy bits first to eliminate as a matter of course , can then tick them off as we go along ,
 
My Engine
 

Attachments

  • 20170905_181304.jpg
    20170905_181304.jpg
    444 KB · Views: 186
Mr Stuart If your happy to help with the work I'm happy to pay for it. Kent isn't to far for me, as mentioned I was in Devon last weekend which is a place I travel to every 5 weeks or so.
 
VELZ said:
give me a moment and ill go out and take a photo of the engine..:)
Click to expand...

many thks for the pic,

think first

1) have u checked all the vaccum hoses please for holes
2) if u look at post 18 and the picture , find the pipe that is suppose to go to the filter , making sure it's not connected to anything plse , know u said the filter is not there , its pipe number 3
2 ) get the crankcase filter replaced

hope that's a start to get u going

if ur stuck plse take a pic of the back of the engine and can guide u
 
Ok I'm happy to give it a go, you tell me where to start and ill do my very best to get it done. and thank you very much for your help, I really appreciate it.
 
VELZ said:
Mr Stuart If your happy to help with the work I'm happy to pay for it. Kent isn't to far for me, as mentioned I was in Devon last weekend which is a place I travel to every 5 weeks or so.
Click to expand...

on one condition u don't pay for it, i've always helped other lz members foc , i wouldn't be able to change the oil etc as i've got a screwed up back and abit rough at the moment , but more than happy to help u

we can certainly check all the vaccum hoses , replace the crankcase breather and go through it for u ,

did u also want to blank off the egr valve , there is a kit for that , as we could get it all done in one go

its gary by the way, lol
 
VELZ said:
Ok I'm happy to give it a go, you tell me where to start and ill do my very best to get it done. and thank you very much for your help, I really appreciate it.
Click to expand...

if it's easier for u we can arrange a day for u to come over and i can go through. the entire engine

can send a list of parts and if u wish get it all done in one go
 
In the pic you attached numbered 1,2 and 3
I have changed I think its no 2, the long one that goes to the vac tank, I haven't taken off 1 and 3, I think 3 was meant to go to a filter, but mine didn't it was connected to the engine as shown in my earlier picture. I will take them off and replace them with new seeing as I have the hose anyway.
Ive had the engine cover off to change the long vac hose, I've had the air filter box off and have seen where the crank case filter lives.
I need to get some inverted torx sockets to remove and replace the crank case filter with the upgraded one which ive not ordered yet. does the oil need to be drained from the engine to change the crank case filter..?
 
Hi Gary, I'm Dean.
Ok lets start again lol
Yes if you could help that would be amazing. a list of parts and where to purchase would be perfect. any day at all suits me as I'm off work as I take care of a disabled son.
 
VELZ said:
In the pic you attached numbered 1,2 and 3
I have changed I think its no 2, the long one that goes to the vac tank, I haven't taken off 1 and 3, I think 3 was meant to go to a filter, but mine didn't it was connected to the engine as shown in my earlier picture. I will take them off and replace them with new seeing as I have the hose anyway.
Ive had the engine cover off to change the long vac hose, I've had the air filter box off and have seen where the crank case filter lives.
I need to get some inverted torx sockets to remove and replace the crank case filter with the upgraded one which ive not ordered yet. does the oil need to be drained from the engine to change the crank case filter..?
Click to expand...

yes , best to check what hoses go to which, just in case they have been put on wrong by the previous person

have to be 100 percent there are no holes in the vaccum pipes, if there is the turbo actuator won't work

u don't have to drain the oil to replace the crankcase filter

see ur egr valve is still fitted , we normally always blank them, there is a kit and can send u a link if u wish
 
Tucka said:
Good on you Mr stuart that's your good deed done for this year lol Nice to see some genuine help going on
Click to expand...

hopefully will prevent me from going to hell , that's what i've always liked about the forum in helping others ,,,, along with the fantastic banter ;):D
 
The Mad Hat Man said:
Why do you need an expert On Freelander1, Freelander2, NAS spec, TD4, KV6, K1.8 and L series Freelanders?
You haven't said whether the problem is electrical, mechanical, engine or drive train related.
If you don't know any of that, you are beyond help - I am out.
Click to expand...

Tucka said:
Good on you Mr stuart that's your good deed done for this year lol Nice to see some genuine help going on
Click to expand...

gstuart said:
hopefully will prevent me from going to hell , that's what i've always liked about the forum in helping others ,,,, along with the fantastic banter ;):D
Click to expand...


Crikey @gstuart - didnt realise you were so knowledgable on all those build types ;)
 
@VELZ

hi

this are the parts u need , then please let me know and can sort out a day to fit and go through the engine

some of the guys may know of better links or deals , so if u hold fire please to see if there are indeed better bargains to be had

egr blanking kit

http://www.ebay.co.uk/itm/LAND-ROVE...hash=item27c39e9390:m:mOfhUvHFXd15Yh1_T-ZQnHw

bmw crankcase breather

http://www.ebay.co.uk/itm/LAND-ROVE...563238?hash=item4665703566:g:mzUAAOxygPtS9h~e

turbo filter
http://www.ebay.co.uk/itm/Land-Rove...002692&hash=item4d1db674c5:g:uO4AAOSwezVWvutx
 
You must log in or register to reply here.

Similar threads

O
Rear passenger window
Replies
5
Views
608
OGY
O
O
Smoke (steam)
Replies
4
Views
243
Arctic2
Arctic2
P
Freelander 2 advice needed.
Replies
12
Views
904
Nodge68
Nodge68
D
Disco 4 (LR4) P401 advice looking for mechanic
Replies
0
Views
193
Dutchroger
D
L
Help needed please with excessive vibration Freelander 2
Replies
6
Views
516
LKD
L
Back
Top