Hi everyone - had my landrover at the garage and after being plugged in to the machine the fault code for the EGR value is coming up - so will need to replace the value - anyone else had this done (probably a stupid question ) and does that value explain the symptoms my car has been having?
Freelander 2 power issue at 70mph
- Thread starter Dianaswr
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Denboy
Active Member
- Posts
- 124
- Location
- Merseyside
Forget a new age valve just fit a blinking plate less than a fiver on flea bay dont even need to remove valve just slacken nuts a slip the plate in retighten nuts job done mine has had one for over a year now runs much better and passed its mot with if fitted last week
Denboy
Active Member
- Posts
- 124
- Location
- Merseyside
Sorry blanking plate
Hippo
Lord Hippo
- Posts
- 53,856
The carbon flush you refer too... Do you realise all they are doing is pulsing very small amounts of water into the engine air intake with the engine running? Its a bit like me washing the dishes by flicking water through our letterbox.
If you really want it done i will do it for £50.
If you really want it done i will do it for £50.
Stv123
Active Member
- Posts
- 497
- Location
- derbyshire
If its not broke don't fix it. Hydro flush works on turbos but only if its been done regularly from new. Sounds like someone wants to pay off his new hydro flush machine.
Got the car checked out and a code for the EGR valve came up - so what to do now? Clean - replace - or add some diesel cleaning formula to the fuel? France is getting ever closer - am going to get the codes checked again tomorrow as the garage reset them.
raywin
Well-Known Member
- Posts
- 3,808
- Location
- North Yorkshire
Mine is blanked off and I dont see a huge difference but it seems a bit better.
