freelander 1 abs ecu ?

hoss A · Nov 2, 2012

success !!! got a part sensor harness , extended it to suit the route of the cabling i decided , spliced it into the multiplug and !! the lights went out !! so anybody who has got the 3 amigos on the early hippos with the two wire brake switch check your sensor wiring first before you start changing your sensors/brake light switch !!

magpiepolish · Mar 20, 2017

FREEL4NDY said:
I have the online wiring diagram's from autodata and believe me you dont want to plugging in the incorrect abs ecu, some smoke may appear!!!...... Bide your time one will turn up or even e mail a few breakers on ebay and such like. I have a 2000 TD4 that I'm breaking I'll have a look at the part number on that if you like. Is it just the ecu your after???

dont suppose you got ecu and key or transponder and connector as lost my keys i know its a old post i have key for barrel that turns ign on but no start as no transponder

deangermouse · Mar 22, 2017

magpiepolish said:
dont suppose you got ecu and key or transponder and connector as lost my keys i know its a old post i have key for barrel that turns ign on but no start as no transponder

I'm breaking a 2001 1.8 if that's any use?

magpiepolish · Mar 23, 2017

thanks but had to be a td4 , bought ecu kit as lost my keys, you must change ews encase anyone else loses keys as i did as ecu only let ignition on and wouldn't run due to immobiliser back on road now

magpiepolish · Mar 24, 2017

was bank on road rear fuel pump undone a hose clip must been when i tidied seats and could never been in correct, lucky rac found it as i thought was bloody ecu etc i just fitted so new in tank pump on its way a cheap one for now

freelander 1 abs ecu ?

hoss A

Active Member

magpiepolish

Member

deangermouse

Active Member

magpiepolish

Member

magpiepolish

Member

Similar threads