Freelander 1.8 Turbo

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Just done the sums...

All in all, and not including labour, it has cost just short of £1500 to get to this point.

Though this includes a full set of Superpro bushes and rear wishbone Bushes, new clutch, new timing belt, Prop CV boot, oil/filters

Still, it's very difficult to walk past it to get into the Disco 3. New toy syndrome is still in full effect :)
 
Not too shabby if you count a Freelander with a blown engine and a 1.8t would only set you back £500 - £1000 ish depending on condition and year.
I know you already had the engine and Freelander so how much of this was down to making it work in a different car?
 
I paid £600 for a 52 plate 1.8 with head gasket issues. Little more than I would have liked to pay, but it was still taxed and MOTD, new VCU, 2 new tyres, and a decent spec. Drove it up the road

Paid £600 for the 75 Turbo, with clutch issues. Taxed and MOTd again. Drove it up the road.

ECU and remap was the big expense, but it was needed. And it was going to be mapped anyway, so may as well have been done at the same time...

Bushes, clutch, pipework etc all came to about £500

4 tyres set me back another £250

Will need a new set of VCU bearings, as they (or something) is banging underneath
 
Ah, you bought the whole car. I guess it is still worth scrap value so if you can get a couple of hundred for it and the old engine I wasn't too far wrong at £1000. New VCU is a big bonus, mine is seized solid so running Mondo mode for now.
I did something similar for a project last year, my son and I bought dead RX8 and an Audi 1.8T to pinch the engine (his idea not mine) All went well as we stripped bits out but suddenly his interest waned when he saw the complications involved in fitting the engine. Needless to say it didn't happen, the Audi is still lying in bits waiting to be dumped and the engine never got fitted. At least you were working with an engine, chassis and gearbox made for each other. Not that I am belittling what you did as it was still a big job and I am well impressed.
 
That was why I went ahead with it. Bolted straight onto the engine mounts and bellhousing :)

Got £50 back for the Rover, as it was missing an engine. Better than nothing!
 
I was able to sell the RX8 for almost what we paid for it but we also had to pay for it being collected as it was a non runner so probably lost £130 all together. We have been selling the Audi in bits and got £75 so far for the bumper and headlights so just another £525 to get our cash back on it, :eek:
 
disco_mikey said:
Well, it appears one of the LR magazines would like to do a feature on this car :D

Watch this space
Click to expand...

Great news !! Always good to see LZ Freelanders in print.

LRO asked to feature my modded V6 they saw it at Billing 8 years ago but after 2 years of changing dates and new "features" editors, they eventually just asked me to send a few pics in and put it in the "Readers Rovers" section.
Still, it was better than nothing.
Can't wait to see yours...........
 
Little update.

2,500 miles done now. Driveline is still holding up, not blown anything up, despite a few brutal traffic light GP's with the local chav's. Surprised quite a few people :D
 
LOL, thought it was the stuff in my glass makin me see things.
Lookin good though, makes a big difference. Wot are the 4 holes either side of the number plate for.
 
75d1c1ceccdbc0b0490f4d545c6a1f6a_zpsdb861gs9.jpg
 
You must log in or register to reply here.

Similar threads

ggrupea
Freelander TD4 vacuum hose servo EGR and turbo
Replies
9
Views
679
ggrupea
ggrupea
S
Freelander 1 Turbo whistle gone suddenly (SOLVED)
Replies
6
Views
623
hd3
hd3
Z
Freelander 2 (LR2) Turbo coolant return pipe
Replies
5
Views
1K
Zebravanman
Z
htr
Freelander 1 K-series 1.8 Fly wheel
Replies
11
Views
849
htr
htr
Cyrus 200
Battery Drain
Replies
6
Views
364
Cyrus 200
Cyrus 200
Back
Top