Freelander 1.8 K series hgf - more data

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Lochlan said:
The Victor Reinz had been suggested as being the best option for the 1.8 petrol on this site
Click to expand...
MLS gaskets are way too fussy for the so so build specification of the K series.

Use the Payen BW750 gasket, to guarantee a good seal, regardless of liner height.

Alternatively use the gasket supplied by DMGRS, which has been designed as improved version of the original gasket.

https://www.dmgrs.co.uk/products/k-series-vvc-payen-bw750-elastomer-head-gasket-set-full-kit
 
I agree. Super difficult to get a Payen BW750 gaskets these days, so the DMGRS alternative may be the best route presently.
 
Lochlan said:
Noted this is an old post. I am curious though. Was this mainly in the earlier Freelander 1 series or cover all 1.8 rover engines.
I ask as I have a 2005 with 98,000 on the clock and still no HGF. I had thought about just putting it in to my local specialist garage and having a Victor Raynes gasket set popped in just as a precaution.
What do you guys think.
Is the 1.8 three door worth putting the money into these days.
I seem to come across many for sale with rather low miles on the clock.
Will they ever be a sought after model??
Click to expand...

Late here, but head gasket never pops. I will give signs... so I would address that ONLY if you have a hint that's one foot in the grave.
Same with my case, did not want to touch it until I saw some oil in coolant.
 
You must log in or register to reply here.

Similar threads

htr
Freelander 1 K-series 1.8 Fly wheel
Replies
11
Views
842
htr
htr
T
injector screw broke
Replies
0
Views
264
toto25
T
T
screw of injector in motor td4
Replies
1
Views
267
hd3
hd3
xDParis64
Hello Again! (SOLVED, Engine replacement)
2 3
Replies
56
Views
3K
xDParis64
xDParis64
M
Crankshaft pulley for FL1 1.8 K-Series 2005 model
Replies
5
Views
565
andyfreelandy
andyfreelandy
Back
Top