Disco 2 Fitted new hub and now have 3 warning lights :(

sierrafery said:

if the fault was logged too many times you might need to clear them... unless the ECU got fubar'd

Click to expand...

Think I'll have to call down the local garage tomorrow and see if he'll reset the faults for me and see if that will work,
Just hope it's not the ecu u/s from changing a wheel bearing

Found the ring broken when I removed the sensor.there was a piece stuck to the sensor looked in and saw more bits.

sierrafery said:

if the fault was logged too many times you might need to clear them... unless the ECU got fubar'd

Click to expand...

Just an update, got the reset done and the light hasn't come back on, with having the old hub and old sensor on road test showed that three wheels reading at 22 and the one that I've been working on reads 18 when moving. Not sure what that means but at least it looks like the problem was a dodgy part, now the hard part seems to be trying to get hold of island4x4 when you ring them the say you have to contact them via email but they seem to take ages to reply averaging over 24hrs per reply!
Just like to say thanks for all your help

welcome... it means that the old hub might be worn though.... this kind of reading might make the TC to kick in unwanted, if it does unplug that sensor and drive it so with 3 amigos on untill you put a good hub