Fitted clear front indicator lenses with bulbs.... they wont work...?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

legge11

New Member
Posts
8
Location
bradford
hey, I have recently purchased some clear indicator lenses with bulbs and they don't work, any ideas to what the prob may be my friends????
:confused:
 
HAHA, its a p38 4.0 se, they are v simple to connect, which has been done, old ones work perfect, my range don't like em! There must be someone who knows bout this s**t?
 
Last edited by a moderator:
No, they were brand new off ebay, all other indicators work fine except new front ones, fillaments on new bulbs were intact....
 
Test the new ones :D

My indicators, gauges and god knows what else stopped working today. I changed the fuses but that didn't work.

Took it to nrgserv and he found another fuse blown, put a new one in and that blew.

I was about to be blamed for fitting the new indicator wrong :(

Turned out it was the new light I had bought which came with bulb already fitted. Now working perfectly with a new bulb :D
 
HAHHAHHA if there is Suew int one of em :D :p :behindsofa:

:hysterically_laughi He only read my first post :D If he sticks around he will discover the truth

i can see you going very far on these forums:dnfnoob:so you have changed the lights and bulbs but are to fecking stupid to put a multi meter on the bulbs and see if you have continuity or try another working bulb to see if that gets them working



Shhhh, you aren't a normal grown up :p:p:p
 
Back
Top