P38A Firewall paint
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,479
I believe it was just painted the same colour and type as the rest of the car...then covered in a soundproofing material.
- Posts
- 2,101
- Location
- Mull of Kintyre
Doesnt sound very firewall ish?
- Posts
- 3,878
- Location
- Near Heathrow.
yep. same paint colour as body, then soundproofing, then oil & grease . . . . plus road muck.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Cannot see mine for the soundproofing?
I'd probably put that Hammerite metal paint on if I wasn't going to use the original colour but Plastikote metal is probably OK.
I'd probably put that Hammerite metal paint on if I wasn't going to use the original colour but Plastikote metal is probably OK.
davidsmith1307
Well-Known Member
- Posts
- 1,333
- Location
- Hull
How about this for heat and/or sound insulation.
http://www.buzzweld.co.uk/search/for/-/in/0/brand/17/
http://www.buzzweld.co.uk/search/for/-/in/0/brand/17/
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Hard to imagine it could give much sound proofing but I'm all ears.
davidsmith1307
Well-Known Member
- Posts
- 1,333
- Location
- Hull
Well that will be a problem!
Contact Buzzweld and ask about it. They are very responsive and know a lot about their product range, application, uses etc.
davidsmith1307
Well-Known Member
- Posts
- 1,333
- Location
- Hull
Just posted on FB
Timing is everything....
Timing is everything....
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Intriguing. The transmission tunnel would be a nice place to try it for the manual box.
Or on my front diff!
Or on my front diff!
Similar threads
