DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
Does anyone know the fault code for the amber warning light on a 1.8
Freelander 2002 model
Freelander 2002 model
Fault code
- Thread starter DCUNNINGHAM
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Madmustang
Well-Known Member
- Posts
- 1,646
- Location
- Castleford
What is the symbol on the light?
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
Engine it's amber I know it's the lambda sensor just don't know witch one
Madmustang
Well-Known Member
- Posts
- 1,646
- Location
- Castleford
How are you going to find out without hooking it up to a code reader?
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
Change them both or buy a reader do the basic ones on eBay do the job
Madmustang
Well-Known Member
- Posts
- 1,646
- Location
- Castleford
Not really it depends on your budget
There is a thread regarding readers do a search and have a look,
There is a thread regarding readers do a search and have a look,
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
But if I buy a reader it will only give me the code not the location or am I wrong I've never used one before usually get ripped of by the garage
The code you get will point you exactly at what the fault is. So if it was an O2 sensor the code will be something like. "O2 sensor 1 on bank 1 out of range". Or "O2 sensor 2 on bank 1 out of range". Being a single bank engine, it'll always say bank 1, but it means "the" 1st or 2nd sensor is faulty.
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
So if I get that code I would still not know if it's the one on the manifold or the middle exhaust
davidsmith1307
Well-Known Member
- Posts
- 1,333
- Location
- Hull
Yes you would - first or second tells you which.
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
I've just ordered a code reader and will see how I go on cheers for the reply
Yes you will. It'll sensor 1 or 2 on bank 1. Sensor 1 is in the manifold, sensor 2 is after the cat.
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
Thanks for that tooYes you will. It'll sensor 1 or 2 on bank 1. Sensor 1 is in the manifold, sensor 2 is after the cat.
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
Got the mini ELM 327 today but there is no instructions
So do I just plug it in and pair with the phone ??
So do I just plug it in and pair with the phone ??
Madmustang
Well-Known Member
- Posts
- 1,646
- Location
- Castleford
Dont you have to download some sort of software with that?
http://obd2help.co.uk/elm327_free_software.htm
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
I've got a app for my phone but apart from that I don't have a clue
I think I have to plug the ELM into the car first then pair with my torque app
I think I have to plug the ELM into the car first then pair with my torque app
Last edited:
GrumpyGel
Well-Known Member
- Posts
- 26,393
- Location
- Christchurch, New Zealand
The ELM device gets its power from the ODB socket - so you have to plug it in first for it "to wake up" and be seen by the phone.
They usually have a little LED on them to show they have power and are on.
You should then be able to "see" it in the Torque app and pair with it, even if the device can't communicate with the car's ECUs.
They usually have a little LED on them to show they have power and are on.
You should then be able to "see" it in the Torque app and pair with it, even if the device can't communicate with the car's ECUs.
DCUNNINGHAM
Active Member
- Posts
- 210
- Location
- West Yorkshire
Thanks mate I will try it today
