Disco 2 Fault 4014 Pump failure 3 (sticking)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jamiegreen

Jamiegreen

Well-Known Member
Posts
628
Location
Wales
Just changed all my calipers/pads/discs and flexi pipes. But has always had that fault on Hawkeye which always comes back eventually. I have changed the relay to rule out that sticking. Is it time for me to swap the ABS modular? I have enough of the things. As far as I know if its the pump its not fixable?
Cheers

Also to mention, it has already had the ground and.. other wire fix.. that causes them problems to the ABS, I can see the 2 new wires coming out of it. But its probably been done sh*t like the rest of the work the previous owner did.
 
It literally took me over an hour to find the 3rd ABS washer thing.. and the one I found wasn't even the one from this car o_Oo_Oo_O

@sierrafery
When doing a modular bleed on hawkeye, do I need to crack open any of the lines since its probably empty?
 
Worked out all good. Its been driven for an hour after, with various hard braking attemps. ABS is working great, and Terrifirma ceramic pads with Bearmach brake discs are working amazing, stops quicker than my 900kg car did! No faults came back.
Cheers @sierrafery
 
You must log in or register to reply here.

Similar threads

B
ABS Issue
Replies
14
Views
874
Bangerang1
B
P
Discovery 2 brake issues after replacment
Replies
4
Views
718
psk100
P
J
D1 300TDi - remove ABS thoughts?
2
Replies
20
Views
2K
Jayridium
J
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
590
oldradiotech
O
J
Discovery 2 td5 failed r9 to fuel pump
Replies
11
Views
1K
Jambo2301
J
Back
Top