All the exterior trim on my 1999 td5 is starting to look tired now, she spent some time in corfu before I bought her so that will not have helped. Ive thought about spraying them with black satin, but I should probably undercoat them first which runs into a bigger task, back to black products are imo pretty crap, also heard to rub some oil on a rag over them but I think the dust on the lanes will stick to that. Any other ideas or tips out there?
Exterior trim back-to-black
- Thread starter henrytd5
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,609
As u say if they are faded and gone greyish then the only thing is to spray them with the paint produced for plastic trim and keep any polish away, to clean just wash and dry.
But if they are still black then Auto Glym's Bumper Black, also called Bumper & Trim Detailer, is the best but it can be three times the price.
But if they are still black then Auto Glym's Bumper Black, also called Bumper & Trim Detailer, is the best but it can be three times the price.
cambridgecockney
Active Member
- Posts
- 714
Smooth peanut butter.
Silverlandy
3.5efi's other half
- Posts
- 5,707
- Location
- Suffolk
I used this the other day and it's pretty darn good!
Toprulesman
Active Member
- Posts
- 152
- Location
- kettering, Northants.
A heat gun is an excellent way of restoring the trim. Search on uTube, I'm sure there are a few videos about how to do it.
- Posts
- 83,282
- Location
- Embasinga stocæ
peanut butter,
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
To make a proper job, it is best to remove the trims completly, rub them down then give them plenty of coats of high build primer, rubbing down inbetween, and then a satin black top coat.
Taking them off is just a case of pulling at the trim gently.
Then remove the old foam adhesive from the trim and body with a rubber wheel,
Then apply adhesion promoter followed by several coats of high build primer, followed by a satin black top coat,
Then thoroughly clean the trim and paint work with isopropyl Alcohol,
I then used 3M,s " RP45 " VHB tape to stick them back on.
And job done.
£37.00 for paint,
£5.00 for IPA, ( bloody handy to have anyway ).
£18.00 for 33m of RP45 tape. ( got loads left and it really does stick plastic to paintwork ).
Taking them off is just a case of pulling at the trim gently.
Then remove the old foam adhesive from the trim and body with a rubber wheel,
Then apply adhesion promoter followed by several coats of high build primer, followed by a satin black top coat,
Then thoroughly clean the trim and paint work with isopropyl Alcohol,
I then used 3M,s " RP45 " VHB tape to stick them back on.
And job done.
£37.00 for paint,
£5.00 for IPA, ( bloody handy to have anyway ).
£18.00 for 33m of RP45 tape. ( got loads left and it really does stick plastic to paintwork ).
Last edited:
discodrivercumbria
Well-Known Member
- Posts
- 3,317
- Location
- South lakes
cambridgecockney
Active Member
- Posts
- 714
Hope you picked that rubbish.
79p peanut butter.
they look good.was thinking of colour coding mine.
79p peanut butter.
they look good.was thinking of colour coding mine.
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
Thats what the children are for !!!.
Silverlandy
3.5efi's other half
- Posts
- 5,707
- Location
- Suffolk
They look great 50pence.
barnes2010
New Member
- Posts
- 267
- Location
- essex
Wd40 I do all the plastic trim bumpers wing mirrors arches engine bay spray on quick wipe job done
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
Cheers !.
Its not the quickest way to bring them back to life, but it will last and has transformed the look of the car.
A hot air gun is good but it can only be done a few times before the effect wears off (several videos on youtude shows how it works)
I used Plasticare Trim Dye BLACK Plastic / Rubber Bumper Paint | eBay
It's been 4 months since application and it still looks spot on.
I used Plasticare Trim Dye BLACK Plastic / Rubber Bumper Paint | eBay
It's been 4 months since application and it still looks spot on.
Similar threads
