Essex lanes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
On the way home the engine was noisy, possibly a pully. Maybe power steering pump as the power steering seemed to go off a few times during the afternoon.

Then it overheated and lost power coming into Braintree, had no heaters all the way home.

Topped up with 2ltrs of Tescos own water for 17p but no heaters.

I'm hoping its just an airlock and will replace the water with antifreeze in the week and top it up through the thermostat housing.

Might even get a new stat in there.

Worth checking the Aux Belt tensioner, had mine fail before. It powers the PAS and Water Pump so could be the issue. :)
 
Was running rough from bures and found the reason why :lol: as i was off today and the wife had not left me a huge list of jobs to do :p i cracked on with fitting me snorkel kit pretty straight forward had no issues as i didnt buy the complete kit downloaded the template of here but i need to get purchase the bracket or find some thing to hold it..few pics along the way......

20121119_120632.jpg

20121119_130011.jpg

20121119_150212.jpg

20121119_150401.jpg
 
Bit of advise needed, going to put on plus 5'' shocks on rear, as i will be changing mounting bracket, should i go for pin/pin or stay with the pin/eye set up. Ive seen the pin ones snapped before. What make should i go for, got pro comp on front but was looking at terrafirma ones.
 
Was running rough from bures and found the reason why :lol: as i was off today and the wife had not left me a huge list of jobs to do :p i cracked on with fitting me snorkel kit pretty straight forward had no issues as i didnt buy the complete kit downloaded the template of here but i need to get purchase the bracket or find some thing to hold it..few pics along the way......

20121119_120632.jpg

20121119_130011.jpg

20121119_150212.jpg

20121119_150401.jpg

Dont forget to seal and put jubilee clips on the pipes.
 
Bit of advise needed, going to put on plus 5'' shocks on rear, as i will be changing mounting bracket, should i go for pin/pin or stay with the pin/eye set up. Ive seen the pin ones snapped before. What make should i go for, got pro comp on front but was looking at terrafirma ones.


Go for pin/pin, if you keep the pin/eye then you will be restricted on articulation.
Didn't know you could get pin/eye +5" shocks
 
Bit of advise needed, going to put on plus 5'' shocks on rear, as i will be changing mounting bracket, should i go for pin/pin or stay with the pin/eye set up. Ive seen the pin ones snapped before. What make should i go for, got pro comp on front but was looking at terrafirma ones.

Only pin/pin for +5 don`t do them up too tight thats why they snap, get Old man Emu or the big bore terrafirma are OK but OME best. then you may need longer flexys and relocation cones if not already fitted. Do you have cranked rear arms if not you may need them aswell to make use of the extra travel.
 
Only pin/pin for +5 don`t do them up too tight thats why they snap, get Old man Emu or the big bore terrafirma are OK but OME best. then you may need longer flexys and relocation cones if not already fitted. Do you have cranked rear arms if not you may need them aswell to make use of the extra travel.
dont forget double cardon ;)
 
Bit of advise needed, going to put on plus 5'' shocks on rear, as i will be changing mounting bracket, should i go for pin/pin or stay with the pin/eye set up. Ive seen the pin ones snapped before. What make should i go for, got pro comp on front but was looking at terrafirma ones.

Ome are good, had my terrafirmas for a year now and not had a problem with them, perform quite nice on the road as well.
i would recommend getting the Gwen Lewis top mount rather then the terrafirma ones tho.

And as James said don't do up the rubber mounts too tight as this puts a lot of pressure on the pins.
 
Double cardon is not needed on rear just a wide angle will do....and is only really needed on the front if you caster correct by radius arms or bushes.
A far better way is clocking the swivels IMO.
Intersting! saves me a few quid when i do it next year!
How in the world do u clock a swivel??
 
Last edited:
Back
Top