Essex lanes

wickford90 · Sep 24, 2012

Jongould said:
Geoff, let me have a word with some of my suppliers and see if I can get a trade price for yah, have you got a part number?

As Mikey said LHG100580

Td5 2001 crankshaft pulley TV damper and oil seal ERR5992 and new bolt.
Thanks mate owe you one.
Lots of people do the Britpart ones, but quite a few different makes.

mikeyt · Sep 24, 2012

pressbrake said:
trouble with them is you keep some landrover stuff ie the bake bean can casing

Didnt realise they kept the casing until i read the blurb again! not really in the same league as spidertrax housings like they say then!

Co-Pang-Yang · Sep 24, 2012

Probably wishful thinking that the parts I ordered online last night will be here in the morning, but I don't think I'm gonna finish work that late tonight and it's not due to rain tomorrow so I shall remain hopeful!

Jongould · Sep 25, 2012

wickford90 said:
As Mikey said LHG100580

Td5 2001 crankshaft pulley TV damper and oil seal ERR5992 and new bolt.
Thanks mate owe you one.
Lots of people do the Britpart ones, but quite a few different makes.

Right had a phone around this morning, I can get a genuine pulley @ 495.60 (vat incl.), RRP is about £570 for a genuine which is a bit steep. I can get Britpart/Allmakes ones but they are cheaper to buy from LR direct who do them at £280ish, haven't found them any cheaper than that I'm afraid

666 george · Sep 25, 2012

Kinhell, why so much? It don't look a lot to it as well.

wangie46 · Sep 25, 2012

666 george said:
Kinhell, why so much? It don't look a lot to it as well.

Was thinking the same, ouch, can you not get one from a breaker have you tried rgb Geof

Jongould · Sep 25, 2012

Its a hard call wether to go for a new or a breakers one but I think if it was cheap enough I would go breakers, its a risk but if its £30-40 its worth the risk IMO

On a slightly different note, managed to finally get me some lights on the fender, they were pricey at £200 for 5, 4 spots for the front and a flood light for the back, they are the mutts nuts though, really really bright and powerful, light up loads infront

Colchester seb · Sep 25, 2012

Jongould said:
Its a hard call wether to go for a new or a breakers one but I think if it was cheap enough I would go breakers, its a risk but if its £30-40 its worth the risk IMO

On a slightly different note, managed to finally get me some lights on the fender, they were pricey at £200 for 5, 4 spots for the front and a flood light for the back, they are the mutts nuts though, really really bright and powerful, light up loads infront

Nice one did you go for the durite ones too????

Jongould · Sep 25, 2012

Colchester seb said:
Nice one did you go for the durite ones too????

Yep, went for these on the front DURITE POWERFUL COMPACT WORK LAMP WITH BRACKET 0-420-55 | eBay and this one on the rear DURITE POWERFUL COMPACT TWIN 3 WATT WORK LAMP WITH BRACKET 0-420-60 | eBay, Durites are just up the road from me and being impatient I tend to use their stuff more often than not, they are excellent lights though, for a 5W 0.7amp unit they give better light than the 5 100W halogens I had on my disco. I didnt pay those prices, still cost me £200 for the 5 of them though!

wangie46 · Sep 25, 2012

Looking good Jon

With this wonderful weather we are having anyone want to go out over the weekend and get muddy?

666 george · Sep 25, 2012

Looking good Jon

I'm only free sunday morning, we could do stapleford golf course first thing. Not to far for you to come as well.

wangie46 · Sep 25, 2012

666 george said:
Looking good Jon

I'm only free sunday morning, we could do stapleford golf course first thing. Not to far for you to come as well.

Sounds good to me a bit of laning sunday morning

little man is itching to get out now it's fixed.

666 george · Sep 25, 2012

It's just outside the LEZ zone. You may have to come round & down. Then we could do a few north north/east of that.

wangie46 · Sep 25, 2012

666 george said:
It's just outside the LEZ zone. You may have to come round & down. Then we could do a few north north/east of that.

That's ok mine is not subject to the lez as it is an estate on the logbook

Colchester seb · Sep 25, 2012

Anyone going to Essex off road Sunday ???

wickford90 · Sep 25, 2012

Jongould said:
Right had a phone around this morning, I can get a genuine pulley @ 495.60 (vat incl.), RRP is about £570 for a genuine which is a bit steep. I can get Britpart/Allmakes ones but they are cheaper to buy from LR direct who do them at £280ish, haven't found them any cheaper than that I'm afraid

Thanks for that Jon, will let you know. Considering going down the used route, but its always a gamble as its a big job ( for me ) to do. Think I might have to take it off the road for a while and get all the bits sorted, still not put HD steering setup on, rear diff is a bit iffey and now the weather is poxy got to do it all on my drive.

Oldno7club · Sep 25, 2012

Hey guys,

If you don't mind dragging a 200TDI defender around this sunday i'd love to tag along.

Colchester seb, Essex is accessible for me. I'm available sunday and ready to get some more mud on...

Let us know.
Cheers
Fab

djguy · Sep 25, 2012

how do you post an image? lol i wanna post a pic of my new truck

djguy · Sep 25, 2012

so can I have a "Essex mud monkeys sticker" now please

Drizz · Sep 25, 2012

Good to see you back Guy!

Essex lanes

Well-Known Member

Active Member

Well-Known Member

New Member

Well-Known Member

Active Member

New Member

New Member

New Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

New Member

Well-Known Member

New Member

New Member

New Member

Well-Known Member

Similar threads