Essex lanes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I brought a kit off eBay and it wad just advertised as the 300 tdi

On the auto mine is locked on the flywheel via a bolt hole from a cover. The Haynes manual is very usefull.

You can borrow mine. If your doing it at the weekend I could come over and drink your tea and take the ****. :)
 
Brian S said:
I brought a kit off eBay and it wad just advertised as the 300 tdi

On the auto mine is locked on the flywheel via a bolt hole from a cover. The Haynes manual is very usefull.

You can borrow mine. If your doing it at the weekend I could come over and drink your tea and take the ****. :)
Click to expand...


I don't know how to do it so you can come over and do it for me while I drink tea and praise :)
 
Found this after my little accident when I flooded the inside of the landy.....

5557558121_307288cbb0.jpg


Much higher and I'd have needed a new engine :eek: :eek:

Snorkel is on the list :D :rolleyes:
 
Snorkel is high on the list I hope lol.
I'd rate it just as high as doing the cam belt.
With regards to which belt kit I just searched '300tdi cam belt kit' on ebay.
Pretty sure it was about £65 plus postage. Make sure you get the modified lower pulley in with the kit.
Oh and I hope you crank bolt isn't as tight as mine. :lol:
 
Co-Pang-Yang said:
Snorkel is high on the list I hope lol.
I'd rate it just as high as doing the cam belt.
With regards to which belt kit I just searched '300tdi cam belt kit' on ebay.
Pretty sure it was about £65 plus postage. Make sure you get the modified lower pulley in with the kit.
Oh and I hope you crank bolt isn't as tight as mine. :lol:
Click to expand...

Go on rub it in :eek:

If the crank bolt doesn't come undone, I'll take it back to the river and drive it in further to aid its miserable death :cool:
 
The misery continues :rolleyes:

One front caliper fooked, both wheel bearings fooked, swivel joint on drivers side fooked with passenger side not far behind it :rolleyes:

This is turning into a full fooking rebuild :doh:
 
I've just refurbished a set of 300Tdi Disco Calipers and given them a good few coats of Red Hammerite. This was to keep the rust at bay and to make them easier to clean the mud off, more than looks, although they look good.

Had the shotblasted clean first and have fitted new pistons and seals.

Was about to stick them both on ebay for £85 the pair if your interested.

(Can help fit them and bleed your brakes if your interested)

Sorry for the Spam, but thought it might help if your gonna buy some anyway. :)
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
1K
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
8K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
10K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
1K
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
3K
hoopfish
hoopfish
Back
Top