Anaconda
Well-Known Member
- Posts
- 3,556
- Location
- Thames Valley
Engine whine
- Thread starter 110Matty
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Anaconda
Well-Known Member
- Posts
- 3,556
- Location
- Thames Valley
Take the belt off and spin the pulley, should be obvious if it's worn.
Cheers, going to have a go when spanners arrive !
Yes, thanks, most videos show using a socket. I’ve got spanners and the two more simple pulleys coming. If it works, I’ll post an update from a novices perspective with part codes / costs etc. wish me luck !!
Anaconda
Well-Known Member
- Posts
- 3,556
- Location
- Thames Valley
Good luck!
Ok, update time. Between heavy (ish) showers today I took the plunge. Went in with the massive viscous fan spanners. Absolutely worth the money, very simple. Having removed the fan, the noise was still there, so a tick for the fan being ok. Removed the belt (much easier than replacing it on your own) and the dreadful noise went completely . On first inspection I didn’t find anything particularly rattlely or rough by hand. Then I changed the two idler pulleys and refitted the belt and the noise was gone…. almost! So I’ve now bought the tensioner pulley and will try to eliminate all unnatural whine. It was nice to actually hear the TD5 almost as intended. Will add further details when solved (hopefully) maybe it will help other novices like me. It was great to have a go myself.
- Posts
- 7,877
- Location
- East Midlands
It's good that it was just idlers rather than anything more expensive like the alternator, power steering pump, air conditioning pump and suchlike.
Anaconda
Well-Known Member
- Posts
- 3,556
- Location
- Thames Valley
Or crank damper, or even fan bearing which is pressed into the engine front cover, that was a pain to change on mine, for no benefit
Are you fitting a new belt while you are there?
I think I will. I am also changing the tensioner for good measure and planned preventative maintenance I think it’s called. I was worried it would have been one of the pressed in bearings, so to be honest I’m ok with changing a few pulleys and the belt. Cheers.Or crank damper, or even fan bearing which is pressed into the engine front cover, that was a pain to change on mine, for no benefit
Are you fitting a new belt while you are there?
easy enough fix, even for me! 
Similar threads
