Engine tapping after rebuild?! Slipped liner?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A bit of an update, narrowed down to be the nearside bank causing the noise. Went for a 30 mile run around and still the same. Swapped lifters on that bank. Noise still there once warm!
Now got the head of that same side.
I can feel with my fingernail a lip between liner and block in middle two cylinders, im guessing we are talking slipped liners now then?
Nick
 
nicka2804 said:
A bit of an update, narrowed down to be the nearside bank causing the noise. Went for a 30 mile run around and still the same. Swapped lifters on that bank. Noise still there once warm!
Now got the head of that same side.
I can feel with my fingernail a lip between liner and block in middle two cylinders, im guessing we are talking slipped liners now then?
Nick
Click to expand...

Somewhere on the net a guy in the states i think, pulled them back into place a drilled and pinned them. A lot cheaper than a new block or engine. http://www.landroverresource.com/docs/Pinning_V8_Liner.pdf
 
Last edited:
wammers said:
Somewhere on the net a guy in the states i think, pulled them back into place a drilled and pinned them. A lot cheaper than a new block or engine. http://www.landroverresource.com/docs/Pinning_V8_Liner.pdf
Click to expand...

Yeah ive seen that before, may be an option. Im going to view another p38 today which has spat a bit of headgasket out. May use my already skimmed heads and repair that. Depends on condition. If not will do that with my engine.
Nick
 
now got both heads of and can feel a slight lip on most of the liners. best measurement i could get using verniers as depth gauge was 0.5mm.
how much can they move?
i would have thought 0.5mm would have disappeared once warm and expanded?
cheers
nick
 
You must log in or register to reply here.

Similar threads

S
Supercharged range oil i water
Replies
5
Views
524
Rubberknees
Rubberknees
S
Classic Tapping noise under load
Replies
9
Views
1K
norseman
norseman
A
P38A Head bolt removal question
Replies
6
Views
289
AndyF07
A
ar1g3
P38A Which EAS repair kit to get?
Replies
18
Views
1K
Grrrrrr
Grrrrrr
Montyjohn
P38A A couple of queries about rebuild EAS valve block
Replies
9
Views
685
Grrrrrr
Grrrrrr
Back
Top