Engine swap
- Thread starter 3lander4x4
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
No IRD issues!
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
No vcu issues!
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
No gearbox synchro crunching!
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Yeah just putting the badge on an xtrail! 
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
I think an Alvis Stalwart with a freelander body on it is the answer!
Yeah just putting the badge on an xtrail!
do yer fink anyone would notice
it needs to be totally rover and not involve bolting a depender, disco or rr chassis under it.....cos that's cheating and not worthy of your talents
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
do yer fink anyone would notice
it needs to be totally rover and not involve bolting a depender, disco or rr chassis under it.....cos that's cheating and not worthy of your talents
Why totally rover? They're pants at the best of times, or Honda!
just trying to be purist but they fitted a kraut doozle in 'em so fit what fits best i say
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
just trying to be purist but they fitted a kraut doozle in 'em so fit what fits best i say
And the FL2 gets a flippin French one!
3lander4x4
Member
- Posts
- 58
That will be the day no such thing
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
WLJayne
Well-Known Member
- Posts
- 3,810
- Location
- Derpyshurr
My 2p but I reckon if you got a K series with the block and head in good nick, then rebuilt it with cleaned castings and all the uprated components, then you stuick it in a FL with en EWP and well sealed cooling sytsem you'd not get HGF once.
Someone might even do that one day :scratching_chin:.......
Someone might even do that one day :scratching_chin:.......
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
You reckon
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
You could put a 1.4K in they never blow head gaskets!
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Bit like goin backwards tho
3lander4x4
Member
- Posts
- 58
The 3 I put in mine last week 1st one stem seals nackered 2nd bottom end nackered 3rd chucked all the oil into inlet so that ones nackered as well.
Its handy having 2 garages in the family sometimes.
Its handy having 2 garages in the family sometimes.
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Wouldn't it have been easier to do the stem seals?
3lander4x4
Member
- Posts
- 58
It probabley would of been but there was another engine there to try so I did.
When the 3rd one was nackered I'd had enuf of it and scrapped the car.
Even if I found a good one there is no saying how long it would of lasted.
When the 3rd one was nackered I'd had enuf of it and scrapped the car.
Even if I found a good one there is no saying how long it would of lasted.
