Engine not starting FL2

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Craiger

New Member
Posts
2
HI All,

Can anyone shed some light on the following problem. FL2 fuel filter changed recommended every 12 months filter was primed but may not enough. Filter and lines have been bleed using hand pump. injectors hoses have been bleed also. battery hold full charge currently at 14.7 volts. fuses checked. Immobiliser checked. unfortunately the engine is cranking but will not fire up.... all working like clockwork before. recent works carried out ( service, hence fuel filter and turbo actuator replaced due to loss of power) has anyone had the same experience. ( could it be possible crank sensor? though landy was running well before hand)

any help advice greatly appreciated

Thanks
 
Fuel filter is every 2 years, not yearly. Only use OE or genuine filters too. Only bleed the system using the correct hand pump, and never pre-fill the filter, as the injectors are easily clogged, as the injection ports are 5 microns across. Also never crack the fuel lines, as they're single use, and should be replaced once the nuts have been disturbed.
 
Back
Top