electric supply to the heater

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

undark

New Member
Posts
18
ust a quick one,everbody,
> I've traced the current for the heater live at the fuse box, and live iether side offuse under the passenger
>seat. Signal is dead at the wiring block under the steering colum meaning
>the relay between the 2 points could be the problem, but where is it? Not
>under the bonnet behind the water bottle, couldn;t trace green/white wire
>there. I couldn't I D it under the steering coweling iether. Do you have any
>ideas? The pdf only covers to 91 and mine seems to run from the fuse box
>behind the heater to a block at the steering coweling. The signal is lost
>there somewhere. Does anyoneknow where the relay should be?
94 classic vogue tdi old shape
>Appreciated.(cold mornins- brrrrr)
>undark
>
 
Hi mate, No, just prior to the soft dash model,no airbags, but I think I've sussed it.Tracing the green/white wire lost me behind the dash and heater, turns out, after talking to the friendly mechanics up at torver and in Kendal ( both extremely helpful. One fellow even photo copied the wiring diagram, magnifying the section I was wanting and gave it to me) Unfortunately, the location of the relay wasn't on this. It turns out to be under the owners manual holder. Live in, nothing out. This relay seems to be where the problem lies. I ordered 1 from rimmer bros for under a fiver yesterday, I'll keep you posted
cheers
undark
 
The problem i have with my soft dash RR is that i can't seem to be getting any power to the blower motor relay.
The relay on the side of the blower unit still has the permanent live on it, but no ignition live to work the relay.
If i use a power probe on the blue/red wire everthing works fine heater and A/C. I have thought of splicing another feed in with a fuse to the relay, but i would like to find the root of the problem..
Prior to this i had the cylinder heads off for a gasket change, i did wonder if there is anything under the bonnet that could be at fault. plus i can't get hold of a wiring for this spec 3.9RR
 
Back
Top