electric impact wrench

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
21 again, lol

will try and find the link for u , i also put axle stands underneath , just in case the air suspension decides to come down
I fekin wished!! Can’t even rember that far back!!
If you don’t mind.. they look robust and light weight!! Good advice on axel stands though. This modern technology can fail. I don’t have that worry with good old fashioned springy things though.. only thing you have to worry about when under mine is rust falling in your eyes.. oh and getting drowned off all the fluid Leaks..
 
The DeWalt DCF899 that I got recently has a claimed breakaway (unscrew only) torque of 1620 Nm. I don't have a way to verify that claim, but so far it has proved plenty powerful. Unless you're planning to use it doing more than occasional landy repairs, you shouldn't have to worry about recharging lots of dead batteries. I've got 3x 4Ah batteries that I share with my DeWalt cordless drill and they last very well between charges. Maybe my experience would be different if I emptied the battery trying get off a really stuck bolt, but haven't had it long enough (or found such a bolt on the 110) for that experience yet.
 
I fekin wished!! Can’t even rember that far back!!
If you don’t mind.. they look robust and light weight!! Good advice on axel stands though. This modern technology can fail. I don’t have that worry with good old fashioned springy things though.. only thing you have to worry about when under mine is rust falling in your eyes.. oh and getting drowned off all the fluid Leaks..

here u go @Weldy , found the link for u ref the ramps

https://www.ebay.co.uk/itm/5-8-ton-...-PAIR-garage-workshop-suv-4-x-4-/162396837736
 
Appreciate it.. they will be well used !!!
Thanks mate..
Gona pop off for a while..
Just had some herbal pain killer and I’m going to relax before me brain explodes !!

no worries and indeed been very pleased with them

they’ve taken the weight of the disco with no problems , reminds me i must get another 2 x axle stands one day

not nice being in pain and have a good rest mate
 
no worries and indeed been very pleased with them

they’ve taken the weight of the disco with no problems , reminds me i must get another 2 x axle stands one day

not nice being in pain and have a good rest mate
Thanks for that .. just had to get some breathing space ..
Just wrote a joke and im to giving it to you my friend ..
I find it funny so I’m sure you will .. it’s all yours maytee.
Just my random mind going in one again lol


A Range Rover , disco and a hippo were out on a days laning together , when they come across this angry Defender guarding a gate.. the Defender was shouting
“ HOY GET ARF MOY LAND BEFORE I BLAST YA FEKIN KNAPPA ARF”

Well, the 3 Amigos;) were shocked and out raged, so as responsible GLASS members they Pulled over to reason with the Defender!
The Range Rover said
“ excuse me good sir,, do you realise your blocking a public byway”
Defender said
“FOOK ARF, MOY LAND”

So disco had to step in .
Disco said “HOY MATE.. divnt be a bell end and just let us gan on Wor way”

Defender lifted his gun and pointed it at disco and said
“FOOK ARF, MOY LAND”

disco backed off with his hands up!!
Well little gay lander piped up and said .

“””oooh love your boots “””

At this stage, Defender is going red in the grill with rage and says
“I WILL GIVE YOU to 10 seconds TO GET OFF MOY FOOKIN LAND”

Rangey screems and feks off bouncing doon the track like a space hopper..

Fender Is “1,2 FOOKIN,3”

And disco said
“all Reet man chill. Am gannin”
After a few attempts the D1 starts and he floats doon the track and cracks a can open!
Buy this time the DEFENDER. is “ 8,...9..”

And the gaylander is still sitting there , drying his hair and doin his nails..

“FOOKIN 10 YA BASTAD”

Mean while Hippo is still looking at the handbags on offer at next on his phone..

DEFENDER” FOOKIN 10 YA LITTLE POOF”

Defender is perplexed ( well he’s confudled, as he can’t spell (perplexed)

Well Defender is even redder in the grill by this stage so he goes over and knocks on the free landies window and says
“ AH SAID 10 AND YA STILL HERE!!! A KNEW YOU LOT WERE FOOKIN THICK . BUT WHAT YA STILL HERE FOR” ????

Little gaylander replied
“ OOH stop being over dramatic , “you big galoot
We have loads of time left yet...
You said I had 2 10 seconds to get off your land .and your only up to ten You silly sausage.,
and me nail varnish is still wet anyhoo”“ but we can’t be that thick mr fender as we all know 2 ,10 seconds ads up to 20”
“”””””KAFOOKINBLAMMMMMMM””””””””””””

Wrote by weldy
So probs needs edited
As am pickled
OH am ganna copyright as well so those theavin mods don’t pinch it and sell it for Kebab n chips
 
Last edited:
many thks,did a search but haven’t seen that particular model, looks really good and also like it has different nm ratings up to 300nm

cheers

I've got loads of Worx tools Gary. For smaller fasteners I use this one fitted with a 6mm hex to 1/4, 3/8 or 1/2 drive adapters.
https://www.worx.com/en_GB/20v-max-lithium-battery-tools/20v-max-lithium-ion-impact-driver-1.html
It's small enough to get into tight spots and light enough to use all day. It's brilliant for doing things like cam cover bolts where speed is handy. It's only got one torque setting but is my go to tool for light unbolting and bolting up jobs. It's also brilliant at normal DIY jobs where winding loads of screws can be tedious.
 
I've got loads of Worx tools Gary. For smaller fasteners I use this one fitted with a 6mm hex to 1/4, 3/8 or 1/2 drive adapters.
https://www.worx.com/en_GB/20v-max-lithium-battery-tools/20v-max-lithium-ion-impact-driver-1.html
It's small enough to get into tight spots and light enough to use all day. It's brilliant for doing things like cam cover bolts where speed is handy. It's only got one torque setting but is my go to tool for light unbolting and bolting up jobs. It's also brilliant at normal DIY jobs where winding loads of screws can be tedious.

thks , they look good value for the money , plus seeing i won’t be using them every day and can’t really go wrong

just to make life easier and we all know what it’s like trying to undo wishbone bolts , lol

appreciate the heads up
 
thks , they look good value for the money , plus seeing i won’t be using them every day and can’t really go wrong

just to make life easier and we all know what it’s like trying to undo wishbone bolts , lol

appreciate the heads up

They are better value than most tools of a similar type. Plus all the tools use the same batteries. This means you buy one tool as a set, that includes 2 batteries and a charger. From then on, you just need to buy the extra tools you need. This saves lots of money compared to the tool set price. I've been using and abusing Worx tools for years now with perfect reliability.
 
They are better value than most tools of a similar type. Plus all the tools use the same batteries. This means you buy one tool as a set, that includes 2 batteries and a charger. From then on, you just need to buy the extra tools you need. This saves lots of money compared to the tool set price. I've been using and abusing Worx tools for years now with perfect reliability.

found that’s a lot of the cost with batteries and chargers , where some companies use different sizes etc and gets very expensive

another reason they look good as u say all the same type of battery , along with many tools that are also rebranded and just because they have a better name are twice the price

had an ELU cordless many years ago and think it was made by black and decker , great tool until i had my van turned over

thks, as i will defentely check them out
 
I'm too far down the Makita route to change to another make now, but I have used Erbauer tools from Screwfix and they are pretty good. Could have saved myself a fortune if they were around a few years ago
 
I'm too far down the Makita route to change to another make now, but I have used Erbauer tools from Screwfix and they are pretty good. Could have saved myself a fortune if they were around a few years ago

also been looking at them, by the looks of things , there coming up pretty well , ive bought dewalt before now but considering now some of them are stupid money

believe the Erbauer even have metal gearboxes instead of the cheaper plastic ones that some of the more expensive have

one of my brothers is a heavy goods mechanic and over the last 30 x odd years he’s bought snap on and i dread to think what he’s spent , ive had stanley screwdrivers roughly the same amount of time and served me very well

but indeed like to buy half decent tools so i theory should last

another name from the past was wolf
 
Back
Top