Fatrover
Well-Known Member
- Posts
- 914
- Location
- Argyll, Scotland
anyone got an Eberspacher D2 in a ser 3 set up for demisting and cabin heat? If so, any good?
Eberspacher
- Thread starter Fatrover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Nope.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
I had one. Look on projects.
Not enough flow for demist and forcing it will screw up the safety features.
Good for heat though. See cheap Chinese.
Not enough flow for demist and forcing it will screw up the safety features.
Good for heat though. See cheap Chinese.
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
Others have used bilge motors instead of the standard series heater blower and reported good results, although, I tried one and it didn't seem to perform any better. No more wind than the regional blower motor.
Col
Col
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Never needed one in my old petrol series
Is yours petrol or diesel? Have you changed the thermostat? Have you back flushed the heater matrix? Is the heater box sealed properly to the bulkhead? Have you tested the blower motor speeds and resistances?
Bobsticle has a good thread in the members vehicle forum about fitting a diesel fuelled air heater, seems that for less than £130 you can get a 8KW heater kit and all the heat you need.
Fatrover
Well-Known Member
- Posts
- 914
- Location
- Argyll, Scotland
Mine doesn’t have any fittings at all for a heater, no matrix, no piping etc.....I got it when I lived in the Canaries where heaters weren’t needed...! Don’t like the sound of these Chinese heaters I joined a FB forum to find out about them and they seem to be a bit hit and miss, I didn’t know there was a projects section, I’ll have a look. Someone on FB reckoned a heated screen is best for demisting, might go that way and look for a secondhand diesel heater for warmth.....
Hicap phill
Well-Known Member
- Posts
- 16,262
- Location
- Wiltshire
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
The diesel heater clears my screen in about 20 mins. It’s not pointed at them but generally dries the whole interior in that time.
saxavordian
Well-Known Member
- Posts
- 9,303
or a nagging wife for winter tends to get the cabin warm quicker.
Fatrover
Well-Known Member
- Posts
- 914
- Location
- Argyll, Scotland
Fatrover
Well-Known Member
- Posts
- 914
- Location
- Argyll, Scotland
OK, going to go with the heated screen....anyone used the Paddock model? Prices seem quite good for the complete kit, screen, wiring etc...
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
From what I’ve hurd some are the old fashioned type not the modern micro wire sort you get in modern cars. I ain’t a clue if they are all the same.
Fatrover
Well-Known Member
- Posts
- 914
- Location
- Argyll, Scotland
To be fair, I’ll be quite happy just seeing out of it!.....
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
I use a Webastor Thermotop, its diesel / water heater. Herats the engine and cab quite well and speeds up the demist once we get going as the water is already warm. We have the Smiths lfat heater and it puts out a decent flow of air (once its cleaned out) We also have a taxi heater plumbed in in the back. My understanding is the air heaters are cab heaters intended to recirculate and heat the whole volume of air rather than blow on a single area. We have the Webasto on a timer so it can be truned on onad left for 10 mins. They do a remote and it has a seting to come on automatically if its -5 but this is more trouble tha its worth. Several times I've looked out to see a nice warm defrosted Landy on a day I'm not goiong anywhere.
Fatrover
Well-Known Member
- Posts
- 914
- Location
- Argyll, Scotland
Yes, good point. My intital thought was to plumb in the diesel heater to work as a de mister, I don’t think it will do that job very well! My Rover doesn’t have any heater fittings or piping from the engine etc. a heated screen solves the vision problems and the diesel heater will do what it was designed for, heating the cab....
