Easter Coast to Coast
- Thread starter suew
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I have had to put a new power steering belt on and broken my cb mike Zip has lost the back of his exhaust and the back door has tape. Think that's about it so far
Of course today is still to come and plenty of potential for damage on the lanes we are doing
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
I have the dreaded three amigos... getting the codes read tomorrow.might be an ABS sensor or hopefully not the ABS pump... oh well at least the spigot rotates easy enough on top of the transfer box so I think I'd got a difflock. Only drawback is getting underneath with a 10 mil spanner. 
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
recomend getting codes read from at least 2 different sources, as difffernt readers can throw different codes up.I have the dreaded three amigos... getting the codes read tomorrow.might be an ABS sensor or hopefully not the ABS pump... oh well at least the spigot rotates easy enough on top of the transfer box so I think I'd got a difflock. Only drawback is getting underneath with a 10 mil spanner.
common faults are front nearside hub assy (dunno why its allus front nearside?) and modulator shuttle valve. had readers give both of these independantly on same fault.
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
N/S front hub has just been swapped recently by us (you) at the busy workshop meet If so, then I have a new front hub waiting
Going to have a look at the hubs today - wobble wheels, check sensor still bolted in etc.
Oh, and I've given Sue the old fuel pump and your vinyl stickers on the premise that shee will see you before I do.
If so, then I have a new front hub waiting Going to have a look at the hubs today - wobble wheels, check sensor still bolted in etc.
Oh, and I've given Sue the old fuel pump and your vinyl stickers on the premise that shee will see you before I do.
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
N/S front hub has just been swapped recently by us (you) at the busy workshop meet
Going to have a look at the hubs today - wobble wheels, check sensor still bolted in etc.
Oh, and I've given Sue the old fuel pump and your vinyl stickers on the premise that shee will see you before I do.
not beyond possibility that its the new hub, tho with the amount of play in the original I'm surprised that didn't bring the lights on!
cheers for the pump and stickers!
The V8 man
Well-Known Member
- Posts
- 1,951
- Location
- Redhill Surrey
Looks like a great trip guys keep the pics and vids coming, some of those lanes look pretty awsome too !
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
slight amount of play found in nearside rear hub - never toucbhed this hub yet! The sensor connector hasn't been disturbed since someone waxoyled the chassis.
gdhaydock
Active Member
- Posts
- 339
- Location
- Hebden bridge, west yorks
I'm back, Cheers to everyone involved, pics will follow when I'm less knackered.
Driven 638 miles in total, lost the back end of the exhaust, had to be recovered from 2 ditches which I drove into for some bizarre reason and managed to obliterate a wall on a tarmac road - other than that, survived unscathed
Driven 638 miles in total, lost the back end of the exhaust, had to be recovered from 2 ditches which I drove into for some bizarre reason and managed to obliterate a wall on a tarmac road - other than that, survived unscathed
I'm home as well
Got stuck for the first time ever (thanks to Sarah for towing me out)
Tried two recoveries (Zip in ditches) and failed, more practice needed
Found some great new lanes
Had a great time with fantastic people and lots of vodka
Pics and videos might follow after coffee, but might have to wait till tomorrow
Got stuck for the first time ever (thanks to Sarah for towing me out
)Tried two recoveries (Zip in ditches
) and failed, more practice needed Found some great new lanes
Had a great time with fantastic people and lots of vodka
Pics and videos might follow after coffee, but might have to wait till tomorrow
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
Hope the final day went well & everyone got home safe!
gdhaydock
Active Member
- Posts
- 339
- Location
- Hebden bridge, west yorks
New exhaust now ordered
- Posts
- 14,902
- Location
- Doncaster
Pffft .. cut it down and make a side exit .. with no back box.
At least then you can't lose it ..
gdhaydock
Active Member
- Posts
- 339
- Location
- Hebden bridge, west yorks
Pffft .. cut it down and make a side exit .. with no back box.
At least then you can't lose it ..
LOL - the one that's on it at the moment is a 3 year old piece of Britpart swiss cheese, I could probably cut it down with a table knife ..... and it may not take kindly to the welder (especially if I'm operating it
)So, another piece of Britpart's finest is on its way which will hopefully do another 3 years.
Was tempted for a stainless one, but can buy 5 cheap ones for the same price which covers me for the next 15 years.
- Posts
- 14,902
- Location
- Doncaster
LOL - the one that's on it at the moment is a 3 year old piece of Britpart swiss cheese, I could probably cut it down with a table knife ..... and it may not take kindly to the welder (especially if I'm operating it
So, another piece of Britpart's finest is on its way which will hopefully do another 3 years.
Was tempted for a stainless one, but can buy 5 cheap ones for the same price which covers me for the next 15 years.
Heheheh, exactly why I bought a downpipe for my 90 .. small hole, got bigger and bigger as I welded it!! I couldn't believe it, no matter what the amperage or wire feed setting, the metal was so thin it just melted away!!
I came to the same conclusion .. time for a few pennies to be spent ..
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
Once the exhaust is sorted, you can revert back to a fully functional rear door without the post-apocalyptic, radiation-sealed look
Once the exhaust is sorted, you can revert back to a fully functional rear door without the post-apocalyptic, radiation-sealed look
Now you have spoiled it
I told Neil his repair job last week had failed and we had to stick the Disco back together with tape
