eas won't lock

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

madtrucker

Member
Posts
78
hi I have p38 1998 diesel when I press the eas lock button the ride height still moves up and down on it's on anybody had this problem thanks Andy
 
madtrucker said:
no the lock button light doe's illuminate but it seemed to lock before the last time I towed the caravan.
Click to expand...

Check white plug at base of passenger A post for dampness corrosion and rotted off wires. This is the interface from height selector and lock switch to ECU.
 
hi finally got round at looking behind A post found 2 white plugs smaller seemed OK bigger one had corrosion inside tried to clean and applied loads of contact cleaner still the same, question is do I have the right plug, should I try a new switch or cut, clean and solder the wires together thanks Andy
 
I removed the two connectors completely on mine. Then cleaned the copper wire and soldered the wires together. No more bad connections to EAS Switch, or Left Door Amps.

Used the method on this link to clean the wires. Might work for the connectors if you dip them in a plastic cup of the solution, but make sure you do both parts of the process.
How to perfectly clean wires in minutes!!!

Edit:
My previous post on replacing the connectors http://www.landyzone.co.uk/lz/3061176-post10.html

Pete
 
Last edited:
You must log in or register to reply here.

Similar threads

D
Nanocom in Preston Lancashire
Replies
19
Views
655
Mark Piercy
Mark Piercy
roger01
2000 RPM max
Replies
7
Views
728
Datatek
Datatek
feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
Flossie
P38A CDL issue
2
Replies
30
Views
1K
cornishboater
cornishboater
feyniriel
P38 windshield wiper liquid not spraying?
Replies
9
Views
775
pwood999
pwood999
Back
Top