Morning people, anyone in the St Helens area with the kit to re- calibrate/ reset ride heights on my 96 DSE, checked codes with Faultmate FSR none showing, car rides too high,obviously tea biscuits and or beer tokens would be in involved, Thanks in advance.
EAS ride heights
- Thread starter RR Qatar
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JohnnyCrash
New Member
- Posts
- 1,917
I live in St Helens, will be around Friday Evening and all day Sunday
PM me your number, also try "Nik the Geek" he's in Windle I think
PM me your number, also try "Nik the Geek" he's in Windle I think
NikTheGeek
New Member
- Posts
- 626
- Location
- Wigan
Billinge actually. But close enough! I can help, but with a wife, 2 kids, 2 horses and a boat, I have absolutely no idea what I'm doing this weekend but it'll be safe to assume I'll be out for most of it! 
JohnnyCrash
New Member
- Posts
- 1,917
not a problem, always here to help a fellow LZ member
Musicmaker
Active Member
- Posts
- 346
- Location
- Glasgow, Scotland
I'm sure I need my ride heights done. What is the method? I have EAS software from RWS, do I put the car on standard profile then measure from the centre of the hub to wheel arch, then adjust the figures accordingly?
Billy
Billy
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
Hub centre to wheel arch for all 4 heights, measurements are in the "How To" section I believe. Adjust in very small steps, if you go out of range if will go to default settings. Look at the RSW web site for more info.
- Posts
- 16,479
Musicmaker
Active Member
- Posts
- 346
- Location
- Glasgow, Scotland
Thanks, checked my ride heights and they were within the tolerances. It looked as if the standard height was too high, but within +/- 4mm.
Cheers again
Billy
Cheers again
Billy
