EAS issue

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
saint, datatek or any other wizards out there,can you tell me is there a temperature sensor in the compressor , had an eas soft fault today put the allcomms on and it said temperature high when susp. inactive its not flagged up again since i cleared it :confused:
 
The Compressor has a thermal cutout to prevent the poor compressor overheating....

I would suggest checking your air struts over for any signs of leaks...if the compressor is working hard enough to trip out, it is working too hard and could be feeding a leak!
 
Saint.V8 said:
The Compressor has a thermal cutout to prevent the poor compressor overheating....

I would suggest checking your air struts over for any signs of leaks...if the compressor is working hard enough to trip out, it is working too hard and could be feeding a leak!
Click to expand...

thanks saint will have it checked
 
Saint.V8 said:
The Compressor has a thermal cutout to prevent the poor compressor overheating....

I would suggest checking your air struts over for any signs of leaks...if the compressor is working hard enough to trip out, it is working too hard and could be feeding a leak!
Click to expand...
+1, leaking airspring most likely.
 
You must log in or register to reply here.

Similar threads

JamesBB
P38A EAS again.
2 3
Replies
41
Views
2K
JamesBB
JamesBB
D
Eas system holds air then drops after driving and turn off
2 3
Replies
47
Views
2K
Datatek
Datatek
M
L322 L322 stuck in extended height
Replies
2
Views
416
Blob
Blob
M
P38A EAS problems P38 1999 DHSE
Replies
10
Views
771
brianp38dse
brianp38dse
S
Air to Springs
5 6 7
Replies
134
Views
5K
Rubberknees
Rubberknees
Back
Top