EAS Fault already!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The invoices from the garage up north don't show the error codes and I can't raise the garage owner at the moment.

Just on the off chance, I dropped in to my local garage. They have the Solus kit and can look at the issue. Just to make some headway, I might ask them to look at the error codes, although they don't fill me with confidence. I guess any idiot can plug a diagnostic tool in and look at the results.
 
so, error codes as below:

F801 FL Signal incorrect
F804 FR Signal incorrect
F810 RL Signal incorrect
F840 RR Signal incorrect

F904 Pressure sensor signal constantly high.

The garage 'thinks' that the suspension wasn't calibrated properly when the new airbags were put in.

Can I get the benefit of your wisdom please?
 
JerryXt said:
so, error codes as below:

F801 FL Signal incorrect
F804 FR Signal incorrect
F810 RL Signal incorrect
F840 RR Signal incorrect

F904 Pressure sensor signal constantly high.

The garage 'thinks' that the suspension wasn't calibrated properly when the new airbags were put in.

Can I get the benefit of your wisdom please?
Click to expand...

There is no need to recalibrate suspension when you fit new airbags. You really do need someone who knows what they are doing to read faults and examine system.
 
Last edited:
JerryXt said:
so, error codes as below:

F801 FL Signal incorrect
F804 FR Signal incorrect
F810 RL Signal incorrect
F840 RR Signal incorrect

F904 Pressure sensor signal constantly high.

The garage 'thinks' that the suspension wasn't calibrated properly when the new airbags were put in.

Can I get the benefit of your wisdom please?
Click to expand...

That lot suggests the compressor is not making enough pressure or the pressure is disappearing through a leak:) As Wammers said the system does not need to be calibrated when airbags are changed although it is possible to damage the height sensors when doing it but it is unlikely that all 4 would be damaged.
You need to clear the faults and re-read them to be sure you have an accurate list of faults.
 
Last edited:
I've done about 100 miles today and the fault hasn't recurred so I can't see the fault yet. i guess I'll wait for the cables and read it myself when they come.

Dopey, I'm near Kingston, Surrey.
 
give us a clue Dopey! For pities sake! At least the first initial of the name, or give us 100 road names and we'll have some fun searching :D




To the knowledgeable ones: I don't suppose the EAS issue could be flat battery related? The first time it came on, the car had been standing for three weeks. The last time, it was reluctant to turn over.
 
JerryXt said:
give us a clue Dopey! For pities sake! At least the first initial of the name, or give us 100 road names and we'll have some fun searching :D




To the knowledgeable ones: I don't suppose the EAS issue could be flat battery related? The first time it came on, the car had been standing for three weeks. The last time, it was reluctant to turn over.
Click to expand...

Low volts cause all sorts of problems with the ECU's but not usually the EAS, but you never know:)
 
You must log in or register to reply here.

Similar threads

feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
855
kevleaper
K
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
590
oldradiotech
O
Flossie
P38A Eas issues
2
Replies
22
Views
1K
Datatek
Datatek
Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
937
Datatek
Datatek
Back
Top