EAS Big spend!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Littelwill

Littelwill

Well-Known Member
Posts
3,065
Location
Lincolnshire
I must be nuts!! But Ive just put together an order for all of the EAS system parts to reconvert my P38 from Springs back to air...! If I can bring myself to click commit to purchase will it be as simple as 1,2,3 to remove springs and fit the EAS system. Ive removed the whole lot so it'll be a mostly new system on the car from pipes to compressor. Is it just plug and play or will I need a Nanocom to get it working once fitted? :eek::eek:


W
 
You will need to calibrate the heights either with Nanocom or the EAS software, othrwise should be plug n play unless any of the wiring has been tampered with.
 
The wiring is all still there. I've taken everything else out and will replace it with new or working second hand so to try and avoid the problems others have.
 
Datatek said:
You will need to calibrate the heights either with Nanocom or the EAS software, othrwise should be plug n play unless any of the wiring has been tampered with.
Click to expand...
As a little aside. How do you calibrate the height using EAS software? I have only ever used it to diagnose faults.
 
Im hoping to get it all back on air ASAP and if its going to be as simple as fitting it and getting a lead to set it up it cant be that hard right.... Then after the respray I'll have to sell it pretty quick before it all goes wrong lol ;)
 
Good luck dude as much as id like mine back on air im not as brave as you. Or have a computer to hand. Plus id have trashed at least two bags around the farm
 
You must log in or register to reply here.

Similar threads

pwood999
P38A EAS Random Extended Mode Selection
Replies
11
Views
815
pwood999
pwood999
Flossie
P38A Eas issues
2
Replies
22
Views
1K
Datatek
Datatek
feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
M
P38A Finally have time to be back on forums again
Replies
4
Views
244
brianp38dse
brianp38dse
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
590
oldradiotech
O
Back
Top