Early 90/Defender 10 Spline Hubs WANTED!

Mr Noisy · Jan 12, 2014

Hello

I need please:

4x front hubs from an old 90/110/defender

They are 10 spline items and are fitted to vehicles with AEU2522 cvs normally.

They are different to 200tdi disco hubs it turns out!!

No bearings required but any with good bearings in would be a bonus!

Please let me know.

Thanks!

P.s. Have disco hubs and various shafts if anyone wants to swap some stuff

Cheers !

landowner · Jan 12, 2014

Is it just the hubs you are after, I may have two off my '84 110, I'll look tomorrow mate

Mr Noisy · Jan 12, 2014

thats great pete thankyou!

think it was 87 onwards though these hubs were fitted??

landowner · Jan 12, 2014

Mr Noisy said:
thats great pete thankyou!

think it was 87 onwards though these hubs were fitted??

Don't think they changed till 92/93 might be wrong

Mr Noisy · Jan 12, 2014

they were changed on a KA chassis but i didnt know if they were the same pre 87?

not very good on my early land rover history

landowner · Jan 12, 2014

Mr Noisy said:
they were changed on a KA chassis but i didnt know if they were the same pre 87?

not very good on my early land rover history

Do you know what was changed, cant see much difference in mine from 84 , I have 92/93 110 csw front axle on the 90 and I think all bits were interchangeable, drive shafts definitely were

Mr Noisy · Jan 12, 2014

Pretty sure that if it had AEU2522 CV and thick drive flanges then the hubs are correct

part number FRC6139

can always pop up if you think youve got a winner

landowner · Jan 12, 2014

Mr Noisy said:
Pretty sure that if it had AEU2522 CV and thick drive flanges then the hubs are correct

part number FRC6139

can always pop up if you think youve got a winner

I'll dig em out and you can compare

Mr Noisy · Jan 12, 2014

great thanks

landowner · Jan 12, 2014

Mr Noisy said:
great thanks

I'll give you a text tomorrow

Mr Noisy · Jan 12, 2014

superb!

top-cat · Jan 12, 2014

are they different to the hubs i gave you last year Sam?

GINGE · Jan 12, 2014

I've got 3 10 spline shafts and CV's i can check mine for you mate but I'm not entirely sure what the differences are.

You'd have to send me a picture or explain what I'm looking for.

Mr Noisy · Jan 12, 2014

top-cat said:
are they different to the hubs i gave you last year Sam?

well im buggered tim because if they were off your 90 they could have been right but tbh i think i would have noticed the difference, and i cant honestly remember if you gave me just hubs or hubs and stub axles etc

when i remember building your axle up, that was the same as 200tdi disco from what i remember so i think perhaps it was either a very late defender axle or it was a disco axle, but i cant properly remember

either way i ended up with about 16 hubs at one point so i had a mass weigh in, but as far as i can remember they were all disco type

too late now though!

top-cat · Jan 12, 2014

Mr Noisy said:
well im buggered tim because if they were off your 90 they could have been right but tbh i think i would have noticed the difference, and i cant honestly remember if you gave me just hubs or hubs and stub axles etc

when i remember building your axle up, that was the same as 200tdi disco from what i remember so i think perhaps it was either a very late defender axle or it was a disco axle, but i cant properly remember

either way i ended up with about 16 hubs at one point so i had a mass weigh in, but as far as i can remember they were all disco type

too late now though!

i only ask as ive still got the rears

Mr Noisy · Jan 12, 2014

this is early 90

this is 200 disco (and perhaps some defender but cant say for sure)

note the deep plastic cap over early 90 drive member with thick drive member

note the stub shaft setup with built in drive flange on 200 disco

Mr Noisy · Jan 12, 2014

the 90 that had these up front had drums on the back

if your 90 had discs on the back maybe someone fitted disco axles because tbh all my spares were disco and any stuff we used on yours must have been disco aswell!

top-cat · Jan 12, 2014

the stub axles where different also, mine had the longer of the two in the picture

Mr Noisy · Jan 12, 2014

GINGE said:
I've got 3 10 spline shafts and CV's i can check mine for you mate but I'm not entirely sure what the differences are.

You'd have to send me a picture or explain what I'm looking for.

maybe the diagrams will help matt, do you have hubs or just shafts and CVs?

cheers

top-cat · Jan 12, 2014

Mr Noisy said:
the 90 that had these up front had drums on the back

if your 90 had discs on the back maybe someone fitted disco axles because tbh all my spares were disco and any stuff we used on yours must have been disco aswell!

could well be sam, just thought i may have some use full parts laying about

Early 90/Defender 10 Spline Hubs WANTED!

Coming in your ears.

Pensioner Pete

Coming in your ears.

Pensioner Pete

Coming in your ears.

Pensioner Pete

Coming in your ears.

Pensioner Pete

Coming in your ears.

Pensioner Pete

Coming in your ears.

Well-Known Member

Greenlane liker, bobble hat hater

Coming in your ears.

Well-Known Member

Coming in your ears.

Coming in your ears.

Well-Known Member

Attachments

Coming in your ears.

Well-Known Member

Similar threads