P38 Monkey
Well-Known Member
- Posts
- 628
- Location
- Cambridge
Don't want to find out the hard way that my P38 won't fit into a standard garage car wash - will it fit? Or will I lose mirrors and possibly paintwork??
Dumb question - P38 through carwash?
- Thread starter P38 Monkey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 33,600
- Location
- North Shropshire
are you 100% sure your pollen filters dont leak?? 
- Posts
- 4,653
- Location
- Rotherham
Never trusted car washes since I worked at a garage in my teens. Prefer doing it by hand (come on someone thats an opening) or letting someone else do it (and thats an even better one)
300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
Haven't seen an automated car wash for probably 20 years. None round this way these days.
P38 Monkey
Well-Known Member
- Posts
- 628
- Location
- Cambridge
Yep - new filters and sealed covers. Did that as soon as advised by the experts on Landyzone...are you 100% sure your pollen filters dont leak??
P38 Monkey
Well-Known Member
- Posts
- 628
- Location
- Cambridge
OK, that's a clear message coming through - hand wash - as ever, many thanks.
- Posts
- 33,600
- Location
- North Shropshire
its not the covers that leak.. well.. they probably do, but the bigger issue is under the plastic the covers attach to, plus the scuttle drains need to be freeYep - new filters and sealed covers. Did that as soon as advised by the experts on Landyzone...
- Posts
- 33,600
- Location
- North Shropshire
- Posts
- 16,361
- Location
- Benfleet, Essex
I put my P38 through the local mechanised carwash whenever I think it needs it.
Yes it fits, no issues so far.
Yes it fits, no issues so far.
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
And the spare wheel well doesn't fill with water?
- Posts
- 12,632
- Location
- Sud ouest France !
Nowt like a hand job.... There it was stated
P38 Monkey
Well-Known Member
- Posts
- 628
- Location
- Cambridge
Oh boy, another problem I didn’t know I had…
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
A standard feature of the P38, L322 etc.
- Posts
- 12,632
- Location
- Sud ouest France !
I did drill an hole but alas it was a wasted one at that. Never any water in there. I did do the tailgate seal bending trick
- Posts
- 12,632
- Location
- Sud ouest France !
The l322 is practically a **** indoor paddling pool that's never quite full enough
P38 Monkey
Well-Known Member
- Posts
- 628
- Location
- Cambridge
More details please !!!I did drill an hole but alas it was a wasted one at that. Never any water in there. I did do the tailgate seal bending trick
- Posts
- 12,632
- Location
- Sud ouest France !
It's where the lower tail gate meets the boot seal... The metal lop needs to be pulled out about 5mm. That is if I've got it correct. Then you adjust the lower tail gate latches so the tail gate pops open when you push the button confirming it's seated nicely onto the seals. Hopefully one of our members with a better memory can elaborate on this tip
@Datatek, @Grrrrrr , @kermit_rr , @Henry_b , @Saint.V8 ... Sorry if I've missed a few good soldiers
@Datatek, @Grrrrrr , @kermit_rr , @Henry_b , @Saint.V8 ... Sorry if I've missed a few good soldiers
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
You need to bend the flange out all he way up to the corner, at least that's what I had to do to eliminate the fish pond in the boot.It's where the lower tail gate meets the boot seal... The metal lop needs to be pulled out about 5mm. That is if I've got it correct. Then you adjust the lower tail gate latches so the tail gate pops open when you push the button confirming it's seated nicely onto the seals. Hopefully one of our members with a better memory can elaborate on this tip
@Datatek, @Grrrrrr , @kermit_rr , @Henry_b , @Saint.V8 ... Sorry if I've missed a few good soldiers
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Oh yes as Data says.
- Posts
- 4,653
- Location
- Rotherham
You've gone and said it now.I did drill an hole but alas it was a wasted one at that. Never any water in there. I did do the tailgate seal bending trick
There's a first time for everything
