drumming nnoise after rebuild

fireblade7 · May 3, 2019

just rebuilt a 300 tdi 90 on galvy chassis all new bushes discs pads ect
on way to get motd after driving up to 50 on de exelaration theres a bad drumming noise comming from tub
checked all all seems fine changed the propshafts still the same
i have around 30mm free play on rear salisbury diff ??
any ideas folks
thanks
mike

jamesmartin · May 3, 2019

are props phased correctly ,your not in diff lock

fireblade7 · May 3, 2019

not in diff/lock
what you mean by phazed
as i have never ever put them on a special way before on any rebuilds and never had a problem james

jamesmartin · May 3, 2019

fireblade7 said:
not in diff/lock
what you mean by phazed
as i have never ever put them on a special way before on any rebuilds and never had a problem james

the relationship between the yokes at either end as below

fireblade7 · May 3, 2019

i will have a look and see but i have not split them
as for sliding part do they go to transfere or axel ??
regards
mike

jamesmartin · May 3, 2019

rear slide is at t/box end front slide at axle end though that doesnt effect balance

fireblade7 · May 3, 2019

cheers james will check all now

tottot · May 3, 2019

My bet is on exhaust moving to contact chassis as you slow down.

fireblade7 · May 3, 2019

alls as it should be

fireblade7 · May 3, 2019

do you think axel is the problem ?? around 30/40mm play

fireblade7 · May 3, 2019

tottot said:
My bet is on exhaust moving to contact chassis as you slow down.

checked that first
was ok

drumming nnoise after rebuild

fireblade7

Active Member

jamesmartin

Well-Known Member

fireblade7

Active Member

jamesmartin

Well-Known Member

fireblade7

Active Member

jamesmartin

Well-Known Member

fireblade7

Active Member

tottot

Well-Known Member

fireblade7

Active Member

fireblade7

Active Member

fireblade7

Active Member

Similar threads